What size lug nut is on a Ford Focus?
The Ford Focus commonly uses lug nuts sized M12 x 1.5 with a 60-degree conical (acorn) seat and a 19 mm hex. However, the exact size can vary by model year and market, so it’s best to confirm for your specific vehicle.
Overview of lug nut sizing on the Ford Focus
The following information covers the most frequently encountered specifications across Focus generations. Variations can occur due to different markets, wheel options, or aftermarket accessories.
Common specifications you’re likely to encounter when replacing lug nuts on a Ford Focus:
- Thread size and pitch: M12 x 1.5 (the most widely used size for Focus models)
- Hex size: typically 19 mm (3/4 inch) wrench/socket
- Seat type: 60-degree conical (acorn) seat to match standard Focus wheels
- Bolt pattern: 5x108 mm for most European and many North American Focus variants
- Notes: Some wheels or aftermarket setups may use different seat types or sizes; always verify for your exact year and wheel specification
In short, the standard Focus lug nut configuration you’re most likely dealing with is M12 x 1.5 with a 60-degree conical seat and a 19 mm hex, typically on a 5x108 bolt pattern. Always double-check for your exact car by referencing the manual or using your VIN to pull build details from the manufacturer.
How to verify the exact lug nut size for your Focus
Because there are model-year and market differences, use these steps to confirm the precise lug nut size for your car.
- Check the owner's manual or the wheel/tire information placard found on the door jamb for lug nut size and torque specifications
- Inspect a current wheel nut for markings that indicate thread size (if present) and measure the hex size with a caliper or wrench
- Consult Ford’s official service site or a dealership with your VIN to pull the exact wheel lug specifications for your vehicle
- When replacing wheels, verify the wheel manufacturer’s requirements and ensure compatibility with the stud size, thread pitch, and seat type
If in doubt, have a professional verify the correct lug nuts and torque values to ensure safe installation and proper wheel fitment.
Summary
For most Ford Focus models, the typical lug nut size is M12 x 1.5 with a 60-degree conical seat and a 19 mm hex, on a 5x108 bolt pattern. Year, market, and aftermarket wheels can introduce variations, so always confirm with the manual, VIN-based specs, or a dealer before purchasing or installing replacements.
