Where is the main button on the Honda CRV steering wheel?
On most current Honda CR‑V models, the MAIN button is located on the left side of the steering wheel and is used to activate the Honda Sensing safety suite, including Adaptive Cruise Control and Lane Keeping Assist.
Location and appearance
To locate it quickly, look at the left spoke of the steering wheel. The MAIN button is clearly labeled MAIN and may appear as a small rectangular button or a recessed pad depending on the trim and model year.
- Mounted on the left steering‑wheel spoke, near the cruise control and audio controls.
- Often labeled with the word MAIN, sometimes integrated into a cluster of buttons on the left side.
- In some trims, the button may be a small clickable pad rather than a traditional pushbutton.
- If you cannot spot it, consult the owner's manual for your specific year and trim level.
In short, the MAIN button is typically on the left side of the steering wheel, labeled MAIN, and is the gateway to enabling Honda’s driver-assistance features.
What the MAIN button does
Pressing MAIN enables the Honda Sensing features that include Adaptive Cruise Control (ACC) and Lane Keeping Assist System (LKAS). When MAIN is off, these features are inactive even if you have other cruise or safety controls engaged. The instrument cluster will usually indicate when the system is active.
Steps to activate Honda Sensing after locating MAIN
After turning on the ignition, perform the following steps to begin using the safety features:
- Press the MAIN button on the left steering‑wheel spoke.
- Look for a confirmation light or message on the instrument cluster indicating that Honda Sensing is active.
- Use the related controls (such as the RES/SET for cruise or the steering wheel buttons for lane‑keeping adjustments) as needed.
Note: The exact interaction can vary by model year and trim, so if the features do not engage after pressing MAIN, check the manual or vehicle settings for the specific version you own.
Model-year and trim considerations
While the basic location tends to be consistent—the left side of the steering wheel—the appearance of MAIN and its surrounding controls can vary slightly between generations and trims. If you have a newer or a differently equipped CR‑V, a quick glance at the left spoke or consulting the owner’s manual will confirm the exact placement and function.
Summary
The MAIN button on the Honda CR‑V steering wheel is typically found on the left side of the wheel, labeled MAIN, and is used to activate Honda Sensing features like Adaptive Cruise Control and Lane Keeping Assist. If you’re unsure of the exact position for your year and trim, refer to the owner’s manual or your dealership for model-specific guidance.
What are the buttons on the steering wheel of a Honda CR-V?
Um you can put the volume. Up put the volume. Down. And then this one right here you can either talk to the to the vehicle give it commands talk to your navigation. Give it an address.
How do I manually start my Honda CR-V with a key?
Put the old school key in. And turn it you'll hear it unlock. And you can open the door now to start the car normally you would put your foot on the brake pedal. And push the start. Button.
Where is the main button on a Honda CR-V?
Press the MAIN button on the right side of your steering wheel.
What is the main button on a Honda steering wheel?
The "MAIN" button on a Honda steering wheel is the primary control for activating the cruise control system and Lane Keeping Assist System (LKAS). Pressing it turns on the system, which will display a "CRUISE MAIN" or "LKAS" indicator on the dashboard to show that the feature is on and ready to be set or engaged.
This video explains the steering wheel controls on a Honda Civic: 55sHonda Canada Inc.YouTube · Jan 23, 2018
- For cruise control: Pressing "MAIN" activates the cruise control system, and a "CRUISE MAIN" message will appear on the instrument panel, indicating the system is ready to have a speed set.
- For Lane Keeping Assist (LKAS): Pressing "MAIN" activates the LKAS. An indicator will appear on the dashboard to show the system is on and waiting for you to press the LKAS button to fully engage it.
