What size rim is a 2017 Honda Pilot?
For the 2017 Honda Pilot, wheel sizes vary by trim: most models use 18-inch rims, while the Touring trim uses 20-inch rims. This article breaks down the trim-specific sizes and what that means for tires and replacements.
In this guide, you’ll find a concise breakdown of which trims ride on which wheel sizes, plus practical notes on identifying and replacing wheels to keep your Pilot safe and performing as intended.
Trim-by-trim Rim Sizes
The following breakdown shows which trims use 18-inch rims and which use 20-inch rims.
- LX, EX, and EX-L trims: 18-inch alloy wheels paired with 235/60R18 tires.
- Touring trim: 20-inch alloy wheels paired with 265/50R20 tires.
In short, unless your 2017 Pilot is the Touring trim, it will typically run on 18-inch rims; the Touring model shifts up to 20-inch wheels. When replacing wheels or tires, confirmation of the exact trim and factory specs is essential to ensure proper fit and handling.
Replacement Considerations
When swapping rims or tires, it’s important to match the diameter and maintain proper fitment to preserve safety, speedometer accuracy, and ride quality. The Pilot’s wheel and tire sizes are designed to work with specific tire tallies and load ratings, so deviations can affect performance and brake clearance.
How to verify your current rim size
Use these quick checks to confirm the rim size on your specific vehicle:
- Look at the tire sidewall for the size code (for example, 235/60R18 or 265/50R20); the last number indicates the wheel diameter in inches.
- Check the door‑jamb placard or the owner’s manual for official wheel size specifications for your trim.
- Inspect the wheel itself for stamped size information, often found on the backside of the spokes or the inner barrel.
Confirming the exact size before buying wheels or replacing tires helps ensure compatibility with the vehicle’s suspension, brakes, and ABS system.
Summary: The 2017 Honda Pilot uses 18-inch rims on LX/EX/EX-L and 20-inch rims on the Touring trim. When replacing wheels or tires, always verify the correct diameter and match the accompanying tire size to maintain proper performance and safety.
What is the bolt pattern on a 2017 Honda Pilot?
Honda Pilot Bolt Pattern - Generations:
| Generation | Production Years | Bolt pattern |
|---|---|---|
| II Facelift [2011 .. 2015] | 2011-2015 | 5x120 |
| III [2016 .. 2019] | 2016-2019 | 5x120 |
| III (YF) Facelift [2019 .. 2023] | 2019-2023 | 5x120 |
| IV (YG) [2022 .. 2026] | 2022-2025 | 5x120 |
How can I tell my rim size?
You can find your rim size by looking for markings on the wheel itself, such as the size molded onto the rear face of the spokes, which will be in a format like "18x7 ½" (18-inch diameter by 7½-inch width). Alternatively, you can check the tire's sidewall for the diameter, which is usually the last number in the code, such as R16. For a precise measurement, use a tape measure to measure the diameter across the bead seat area or the width between the bead seats, as shown in this YouTube video.
You can watch this video to learn how to measure the diameter and width of your rims: 1mehowautoYouTube · May 21, 2015
Using markings
- On the wheel: Look for stamped or cast numbers on the inner or outer face of the spokes. The size is often presented as "Diameter x Width" (e.g., "18x7 ½").
- On the tire: The rim diameter is often the last number in the tire's size code (e.g., in 205/55 R16, the "16" is the diameter).
By measuring
- For diameter:
- Find the bead seat, which is the edge where the tire sits.
- Measure the distance from one bead seat to the opposite one.
- For width:
- Measure the distance between the inner edges of the bead seats, not the outside of the rim lips.
- If your tire has a size code like 205/55 R16, the rim width is typically about 1.5 inches narrower than the tire's width in millimeters, which is 205 mm205 mm205 mm in this example.
Other important information
- Bolt pattern: This refers to the number of bolt holes and their spacing. You can count the bolts and measure the distance between the centers of two bolts across from each other, as shown in this YouTube video.
- Offset: This is the distance from the hub mounting surface to the centerline of the wheel and is typically expressed in millimeters. It is crucial for proper fitment and can be calculated if you know the diameter, width, and backspacing of the rim.
- Backspace: This is the distance from the back of the wheel to the hub mounting surface, measured in inches.
This video explains what is rim size and how to understand rim marking: 1mManiZillaYouTube · Mar 21, 2019
What Hondas have 4x100?
Compatibility and Suitability: The 4x100 bolt pattern is predominantly found in compact and subcompact Honda models, such as older Civic models, the Fit, CRX, Insight, Del Sol, Prelude, and City. It's crucial to verify the bolt pattern for your specific vehicle model and year.
What is the lawsuit on the 2017 Honda Pilot?
Mobayen v. Honda, represents owners and lessees of 2017–2019 Honda Odyssey and 2014–2019 Honda Pilot vehicles. The lawsuit alleges that a judder from a “torque converter lock-up clutch” is caused by deteriorated transmission fluid resulting from a transmission defect.
