What size rim is on a 2008 Ford Taurus?
The rim size for a 2008 Ford Taurus varies by trim: base models use 16-inch rims, SE/SEL trims use 17-inch rims, and the SHO uses 18-inch rims. For exact sizing on your specific vehicle, check the door jamb sticker or the owner's manual, especially if aftermarket wheels were installed.
In 2008, Ford offered a range of wheel options tied to trim levels and packages for the Taurus. Because some cars may have had dealer-installed or aftermarket wheels, the only sure way to know is to verify your individual vehicle’s specifications.
Wheel sizes by trim
Typical factory wheel diameters by trim
Below is a concise guide to the most common factory rim diameters used on the 2008 Taurus, organized by trim. If you are shopping for wheels or replacements, use these sizes as a starting point but verify for your exact vehicle.
- Base models: 16-inch rims
- SE/SEL models: 17-inch rims
- SHO models: 18-inch rims
Note: Some cars may have different wheels due to optional packages or dealer-installed enhancements. Always confirm with the vehicle’s door sticker or manual.
How to verify your specific wheel size
To confirm the exact rim size on your 2008 Taurus, you can:
- Check the driver's door jamb sticker for the original wheel size and tire specification.
- Inspect the tire sidewall; the rim diameter is included in the tire size (for example, numbers like 205/55R16 indicate a 16-inch rim).
- Refer to the vehicle's manual or consult a Ford dealer with your VIN for precise factory specs.
Be aware that aftermarket wheels may differ in diameter and width, which can affect fitment and safety.
Summary
The 2008 Ford Taurus did not have a single universal rim size. The most common factory diameters are 16 inches on base trims, 17 inches on SE/SEL, and 18 inches on the SHO. Verify with the door jamb sticker or the owner's manual for your exact vehicle, especially if aftermarket wheels are installed.
