What size socket fits a Dodge Charger lug nut?
The normal lug nut socket size for a Dodge Charger is 13/16 inch, which fits the vast majority of factory wheels. However, some trims, aftermarket wheels, or special editions can use different sizes, so it’s important to verify for your exact setup.
Understanding the typical lug nut size on the Charger
The Dodge Charger has used several wheel configurations over its generations. In most cases, the factory wheels use a 13/16" hex lug nut. If your Charger has aftermarket wheels or a less common trim, the lug nut size could differ. Always confirm the size for your specific vehicle before attempting to loosen or remove a lug nut.
- 13/16 inch hex lug nuts are the most common size for Charger factory wheels.
- Locking lug nuts require the original key or a compatible extractor; they are not removed with a standard socket.
Conclusion: For the majority of Chargers, a 13/16" socket will work. If you have aftermarket wheels or a unique trim, double-check the exact size to avoid damage.
How to verify the correct socket size for your Charger
To prevent mistakes, use these steps to identify the proper socket size for your lug nuts before you work on your wheels.
- Check the owner's manual or service documentation for wheel lug nut specifications.
- Inspect a lug nut or its packaging for size information, or measure the hex flats with a caliper or ruler to determine the correct size.
- If you have aftermarket wheels, consult the wheel manufacturer or the product listing for the lug nut size and seat type.
- If you can’t determine the size, take a lug nut and the wheel to an auto parts store—they can match the correct socket size for you.
Note: Some Chargers use locking lug nuts. You’ll need the original key or a compatible extractor to remove them, which means you might not use a standard socket on those particular nuts.
Tips for safe removal and installation
Always use the correct socket, apply torque with a calibrated torque wrench, and chock the wheels when lifting or changing a tire. If you encounter resistance, stop and re-check the socket size to avoid rounding or damaging the lug nut.
Summary
In practice, the typical socket size for Dodge Charger lug nuts is 13/16 inch. Verify for your exact wheel configuration—especially if you have aftermarket wheels or locking lug nuts—to avoid damage and ensure proper torque during installation.
