Will a full size mattress fit in an F-150?
Yes, a full-size mattress can typically fit in the bed of an F-150 pickup truck, with some caveats. The dimensions of a full-size mattress and the cargo space in an F-150 bed need to be considered to ensure a proper fit.
Mattress Dimensions vs. F-150 Bed Size
A standard full-size mattress measures 54 inches wide by 75 inches long. The bed of an F-150 pickup truck typically ranges from 67 to 78 inches in length, depending on the cab configuration. The width of the F-150 bed is around 50 to 65 inches, again varying by model. This means a full-size mattress can generally fit lengthwise in the truck bed, but may require some angling or partial folding to fit the width.
Factors to Consider
When transporting a full-size mattress in an F-150, there are a few important factors to keep in mind:
- Cab Configuration: Crew cab F-150s have a shorter bed length than regular or extended cab models, so a full mattress may be more difficult to fit.
- Mattress Thickness: Thicker mattresses, such as those with pillow tops or memory foam, may not fit as easily in the truck bed.
- Securing the Load: The mattress will need to be securely tied down to prevent it from shifting or blowing away during transport.
- Overhang: Depending on the mattress size and truck bed length, the mattress may overhang the rear of the truck, requiring extra caution and potentially needing a trailer.
With some careful planning and preparation, a full-size mattress can generally be transported in the bed of an F-150 pickup truck. However, the specific dimensions and configurations of both the mattress and the truck should be considered to ensure a safe and successful move.
How to move a full-size mattress in a pickup truck?
Pickup Truck: Position the mattress as flat as possible in the truck bed. Secure one end of the nylon ropes or straps to the D-rings, wrapping them over the mattress, and ratcheting or tying (with a “trucker's hitch” knot) the remaining slack.
Will a full-size mattress fit in an F150?
Generally speaking, yes. A full-size mattress measures 75 inches long by 54 inches wide; the F-150 truck's 6.5-foot and 8-foot beds both are long enough, but they measure 50.6 inches wide between wheelhouses, so be sure to strap the mattress down properly since it will likely have to overhang the bed walls.
What size mattress is in the Ford F-150?
Your F-150 likely has a 5.5-foot, 6.5-foot, or 8-foot bed, which depends on the truck's cab style. The 5.5-foot bed is most common with the SuperCrew cab, the 6.5-foot bed with the SuperCab, and the 8-foot bed with the Regular Cab. To confirm the exact size, measure the inside length of the bed from the bulkhead to the inside of the tailgate and divide the measurement in inches by 12.
- 5.5-foot bed: Approximately 67.167.167.1 inches long.
- 6.5-foot bed: Approximately 78.978.978.9 inches long.
- 8-foot bed: Approximately 97.697.697.6 inches long.
Will a full-size mattress fit in a pickup truck?
Yes, a full-size mattress (54′′54 double prime54′′ wide x 75′′75 double prime75′′ long) will likely fit in a full-size pickup truck bed, though it will likely be wider than the wheel wells, and might be a tight fit depending on the bed's length and width. It is essential to secure the mattress with straps, preferably with the mattress oriented with its long side parallel to the truck bed to minimize overhang.
Factors to consider
- Mattress size: A full-size mattress is approximately 545454 inches wide and 757575 inches long.
- Truck bed width: A standard full-size truck bed is usually wider than a full-size mattress, but its width is often reduced by the wheel wells.
- Truck bed length: A full-size truck bed (usually 6.5 or 8 feet) is typically long enough to accommodate the 757575-inch length of the mattress.
- Securing the load: It is critical to secure the mattress with straps to prevent it from shifting or blowing away. Use the truck's tie-down points, and consider orienting the mattress with its long side parallel to the bed to reduce the amount of overhang.
Tips for a successful transport
- Orient the mattress: Place the mattress with its longest side parallel to the bed to minimize the overhang and improve stability.
- Remove any covers: If you have a hard tonneau cover, you may need to remove it to access the tie-down points for properly securing the mattress.
- Use proper tie-downs: Use strong straps or rope to tie the mattress down. Cross the straps over the mattress in an "X" pattern to secure it evenly.
- Check the load periodically: For longer trips, stop every 15-30 minutes to check that the straps are still tight and the load is secure.
