What size socket for 2017 Chevy Cruze lug nuts?
When it comes to maintaining your 2017 Chevy Cruze, knowing the correct socket size for your lug nuts is essential for tire changes and other wheel-related services. This article will guide you through the specifics of lug nut sizes and provide tips for proper maintenance.
Socket Size for Lug Nuts
The lug nuts on a 2017 Chevy Cruze typically require a 19mm socket or a 3/4 inch socket. This size is standard for many vehicles, making it a common choice for both professional mechanics and DIY enthusiasts.
Steps for Changing a Tire
Changing a tire can be straightforward if you follow these steps:
- Gather Your Tools: Ensure you have a 19mm socket, a ratchet, a jack, and a jack stand.
- Loosen the Lug Nuts: Before lifting the vehicle, use the socket to loosen the lug nuts slightly.
- Lift the Vehicle: Use the jack to lift the car off the ground, then secure it with a jack stand.
- Remove the Lug Nuts: Fully remove the loosened lug nuts and take off the tire.
- Install the New Tire: Place the new tire onto the hub and hand-tighten the lug nuts.
- Lower the Vehicle: Carefully lower the vehicle back to the ground.
- Tighten the Lug Nuts: Use the socket to tighten the lug nuts in a crisscross pattern to ensure even pressure.
Following these steps will help ensure that your tire change is safe and effective. Always remember to check the lug nut torque specifications in your owner's manual for optimal safety.
Tips for Maintaining Your Lug Nuts
To keep your lug nuts in good condition, consider the following tips:
- Regular Inspections: Check your lug nuts periodically for tightness, especially after a tire change.
- Use Anti-Seize Compound: Applying a small amount of anti-seize compound can help prevent rust and make future removals easier.
- Replace Damaged Lug Nuts: If you notice any cracks or deformities, replace them immediately to ensure safety.
By following these maintenance tips, you can prolong the life of your lug nuts and ensure your vehicle remains safe on the road.
Frequently Asked Questions
What is the lug nut pattern for a 2017 Chevy Cruze?
Yes, all Chevy Cruzes feature a 5x105 bolt pattern.
While this isn't the most commonly used lug configuration on the road today, it's still fairly popular. That means you'll find plenty of stylish rims to choose from when hunting down a new set of rims for your Chevrolet.
What size socket fits Chevy lug nuts?
The socket size of a Chevy Silverado lug nut is 13/16″, precisely you would need a 22mm hex socket to fit.
What is Chevy lug nut size?
There are various wheel nuts for Chevy sedans, SUVs, and trucks in the market. Most Chevy vehicles use steel wheel nuts. The most common thread sizes that are used by Chevy cars are M14x1. 5, 1/2-20 UNF, M12x1.
What size socket are Chevy Cruze lug nuts?
19mm
CHEVROLET CRUZE Lug Nuts and Lug Bolts - 19mm Wrench Size Required (mm) - Free Shipping on Orders Over $109 at Summit Racing.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Can I use 7/8 socket for 22mm?
A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
What size socket are Hyundai lug nuts?
The most common thread sizes of the lug nuts on a Hyundai wheel are M12x1. 5mm, hex 21mm.
Can I use 3/4 instead of 19mm?
Yes. 3/4″ is . 750″ and 19mm is 0.74803 Inches. Only 2 thousands of an inch difference.
What size are the lug nuts on a 2017 Chevy Cruze?
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Flattop Capped, 1.413″ Length, Zinc (Sold by each)
