What size socket is a GM drain plug?
The standard size socket for a GM drain plug is a 3/4-inch socket. This size is commonly used for oil drain plugs on many General Motors vehicles, including popular models like the Chevrolet Silverado, Tahoe, and Equinox, as well as the GMC Sierra and Yukon.
Detailed Explanation
When it comes to changing the oil in a GM vehicle, the drain plug is a crucial component that needs to be properly loosened and tightened. The size of the socket required to remove and replace the drain plug is an important piece of information for DIY mechanics and those performing routine maintenance.
According to the information gathered from various automotive repair resources, the majority of GM vehicles use a 3/4-inch drain plug. This size is consistent across many of their popular truck, SUV, and sedan models. Using the correct 3/4-inch socket helps ensure the plug can be safely removed without stripping the threads or causing damage to the oil pan.
Tips for Changing a GM Drain Plug
- Use the Right Socket Size: Always use a 3/4-inch socket when working on a GM drain plug. Attempting to use the wrong size can lead to difficulties in removing or tightening the plug.
- Check for Corrosion: Over time, the drain plug can become corroded, making it harder to remove. Applying a penetrating lubricant can help loosen a stuck plug.
- Tighten Properly: When replacing the drain plug, be sure to tighten it securely but do not overtighten. The recommended torque specification is typically around 18-25 ft-lbs.
- Dispose of Used Oil Properly: After draining the old oil, make sure to dispose of it at an authorized recycling center or hazardous waste facility.
Knowing the correct 3/4-inch socket size for a GM drain plug is an essential piece of information for anyone performing oil changes or other maintenance on these vehicles. Following best practices when removing and replacing the plug can help ensure a smooth and successful oil change process.
What size socket is the oil drain plug on a 2017 GMC Sierra?
15mm socket for drain plug.
What size is the oil plug on a GMC?
Dorman – Standard Engine Oil Drain Plug: M12x1. 75 Thread, 15 mm Head, 1 Pack (Part No. 090-175CD)
What size is a Chevy drain plug?
2 Pcs Oil Drain Plug M12-1.75, 15mm Hex Head T45 Torx Compatible with 2013-2022 GMC, Buick, Cadillac, Chevrolet, Replace GM 55577568, 090-948, 090948.
What size is the drain plug on a 2008 Corvette?
Dorman – Standard Engine Oil Drain Plug: M12-1.75 Thread, 15 mm Head, 1 Pack (Part No. 65430)
What size socket is my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size is the oil drain plug on a 5.7 Vortec?
CHEVROLET 5.7L/350 Oil Pan Drain Plugs - M12 x 1.75 Thread Size - Free Shipping on Orders Over $109 at Summit Racing.
Where is the oil drain plug on a C5 Corvette?
So you really just want to Snug it up on there.
What size socket for 2015 Silverado oil drain plug?
The oil pan is located right here it's a drain plug. So I'm gonna take a 15 millimeter wrench loosen up this drain plug.
What size is the drain plug on a c5?
15mm
Use your 15mm box wrench or socket and ratchet to loosen and, ultimately, remove the drain plug.
What size socket do I need to remove the oil?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
