How much oil does a 2017 EcoBoost take?
In short, there isn’t a single number for all 2017 EcoBoost engines—the capacity varies by engine size and model. Typical figures range from about 4 quarts to 8 quarts (including the oil filter), so you’ll be dealing with different capacities depending on which EcoBoost you have.
Understanding the oil capacity question
The 2017 EcoBoost family spans several turbocharged engines used across Ford cars, SUVs, and trucks. Each engine code has its own oil capacity, and some configurations differ even within the same engine family. Knowing the exact figure for your vehicle requires the specific engine and model. Below are the general capacities for the common 2017 EcoBoost engines, shown as approximate values including the filter.
Common 2017 EcoBoost engines and approximate capacities
Note: These figures are approximate and may vary slightly with vehicle options or aftermarket parts. Always verify from the owner's manual or Ford service data for your exact VIN.
- 1.0L EcoBoost I3: about 4.0 quarts
- 1.5L EcoBoost I4: about 4.5 quarts
- 1.6L EcoBoost I4: about 4.5 quarts
- 2.0L EcoBoost I4: about 5.0 quarts
- 2.3L EcoBoost I4: about 5.0 quarts
- 2.7L EcoBoost V6: about 7.0 quarts
- 3.5L EcoBoost V6: about 7.5–8.0 quarts
Oil capacity can be influenced by factors such as oil cooler presence, additional accessories, and whether the vehicle uses a different oil filter size. Ford generally recommends the appropriate grade for EcoBoost engines—commonly 5W-20—with 5W-30 acceptable in certain conditions; always confirm the exact specification for your vehicle in the manual or service data.
How to confirm the exact capacity for your vehicle
To be certain about your specific 2017 EcoBoost oil capacity, follow these steps.
- Consult the owner’s manual for the exact oil capacity with the filter listed for your engine code.
- Identify your engine code and model year from your VIN or dash label, then cross-check with Ford’s official specifications or a dealer.
- When performing an oil change, add oil gradually and use the dipstick to avoid overfilling; start with slightly less than the listed capacity and top up as needed.
- If in doubt, contact a Ford dealer or qualified mechanic with your VIN for a precise figure.
Following these steps ensures you fill the engine correctly and maintain proper oil pressure and performance.
Summary
Because the term “2017 EcoBoost” covers multiple engines across different Ford models, the oil capacity is not a single value. Typical capacities span roughly 4 to 8 quarts, depending on whether you’re dealing with a small 1.0–1.6L I3/I4 EcoBoost, a 2.0–2.3L I4 EcoBoost, or larger 2.7–3.5L V6 EcoBoost variants used in trucks like the F-150. Always verify the exact capacity for your exact engine and model in the owner’s manual or Ford’s official service data, use the recommended oil grade, and check the dipstick after adding oil to ensure proper level.
