What size speakers are in the 1995 Crown Victoria?
The typical stock setup for the 1995 Ford Crown Victoria features 6x8 inch speakers in the front doors and 5x7 inch speakers in the rear doors. Some variations exist depending on trim level and factory radio options.
This article examines the standard configuration, notes potential variations by trim or package, and provides guidance on how to verify the exact sizes in your specific vehicle from that model year.
Common factory sizes by location
The following sizes reflect the most widely installed factory configuration for the 1995 Crown Victoria. They are also the sizes most aftermarket replacements are designed to match.
- Front doors: 6x8 inches
- Rear doors: 5x7 inches
These sizes cover the typical front- and rear-door installations for the era; individual vehicles may differ based on trim level and audio package.
Notes on variations
Some variants or optional sound systems may deviate from this standard, including different rear-door sizes or additional speakers in the rear deck. Always verify the exact sizes for your VIN by measuring the mounting openings or consulting the vehicle’s service manual.
How to verify exact sizes in your car
Before you attempt to replace or upgrade speakers, confirm the exact sizes for your vehicle using straightforward methods.
- Remove a door panel and measure the diameter of the mounting hole and the cutout, noting the depth of the speaker cavity.
- Check the vehicle’s original window sticker, service manual, or VIN-specific OEM parts catalog to confirm the exact spec for your trim and radio option.
- Compare measurements with common aftermarket sizes (6x8 and 5x7) and bring photos or measurements when shopping to ensure a proper fit.
Once you’ve confirmed the sizes, you can plan a replacement or upgrade that preserves proper fitment and sound quality. In most cases, you’ll be working with 6x8 front speakers and 5x7 rear speakers, unless your specific car differs due to trim or options.
Upgrade considerations
Upgrading speakers in a 1995 Crown Victoria requires attention to compatibility and installation details to avoid rattles, misfitment, or electrical issues.
- Impedance: Most factory systems use 4-ohm speakers; verify the impedance of your existing setup or the replacement to maintain proper head-unit load.
- Mounting depth: Some 6x8 speakers require deeper mounting; check the door cavity depth and use appropriate spacers or shallow-mount designs if needed.
- Wiring and adapters: Some aftermarket kits require harness adapters to match factory connectors; ensure you have the correct adapters for your trim and year.
- Component vs. coaxial: If upgrading to component sets, plan for separate tweeters and crossovers and confirm head-unit power output can drive the new components.
With careful selection and installation, upgrades can improve your Crown Victoria’s sound without sacrificing fit or reliability.
Summary
The 1995 Ford Crown Victoria typically arrived with 6x8 inch front-door speakers and 5x7 inch rear-door speakers. While this configuration covers the majority of vehicles from that year, variations can occur by trim level and optional audio packages. Verifying the exact sizes in your car—by measurement or OEM documentation—ensures accurate replacements and successful upgrades. In short, start with 6x8 fronts and 5x7 rears, and confirm before purchasing any aftermarket speakers.
How much horsepower does a 1995 Crown Victoria have?
How fast is the 1995 Ford Crown Victoria? All 1995 Crown Victoria trim variations have 190 horsepower.
What size speakers are in the Crown Vic?
The standard speaker size for a Ford Crown Victoria (1998-2011) is 6x8 inches. These can be replaced with aftermarket 6x8s or can be fitted with 5-1/4 inch speakers by using adapters or brackets. For the rear deck, some sources indicate that the factory rear deck speakers may be 6x9 inches in some models, but it is best to confirm before purchasing.
Front and rear doors
- Factory size: 6x8 inches
- Direct fit: Aftermarket 6x8s
- Alternative fit: 5-1/4 inch speakers can be installed with the use of adapter brackets
Rear deck
- Factory size: 6x8 inches (in most models)
- Alternative fit: Some 1995 models may use 6x9 inch speakers in the rear, but this is not typical for 1998-2011 models
Other considerations
- 5x7 inch: Some 6x8 inch speakers will also fit in 5x7 inch locations.
- Adapter brackets: You will need adapter brackets if you choose to install 5-1/4 inch speakers.
- Tools: Replacing the speakers requires a Phillips screwdriver, small flat blade screwdriver, panel tool, and a Torx T30 driver.
How to find out speaker size?
To measure a speaker, remove the old speaker and measure its outer diameter across the mounting frame's widest point and the cutout diameter of the hole it sits in. You should also measure the mounting depth, which is the distance from the front of the speaker to the back. It is crucial to take all these measurements to ensure a new speaker will fit correctly, as "speaker size" often refers to a category based on the cone, not the physical dimensions.
This video demonstrates how to measure a speaker for a replacement: 1mParts ExpressYouTube · Mar 11, 2016
Step 1: Remove the old speaker
- For safety, disconnect the power source (like the car battery) before you begin.
- Remove the speaker from its mounting location.
Step 2: Measure the key dimensions
- Outer Diameter: Measure the widest part of the speaker's mounting frame. This is often the most important measurement for ensuring the new speaker won't fall through the opening.
- Cutout Diameter: Measure the diameter of the hole the speaker is mounted in. This is the hole behind the speaker's frame and is crucial for a flush, recessed fit.
- Mounting Depth: Measure from the front of the speaker to the furthest point on the back (usually the magnet). Make sure the new speaker's mounting depth will not interfere with any other parts, like a car window mechanism.
Step 3: Compare and choose a new speaker
- Match the cutout: The new speaker's cutout diameter must be less than or equal to the hole's diameter, but you will likely be limited by the speaker's overall outer diameter.
- Check clearance: Ensure the new speaker's mounting depth is less than or equal to the available space.
- Consider your needs: Also consider other specifications like impedance (ohmso h m s𝑜ℎ𝑚𝑠) and power handling (RMS and peak).
What size are factory door speakers?
And you're going to put down that you got 6.5s. Now you go look for the right 6.5s. Much as I like to say these things are just plugandplay. A lot of times it takes a little bit more thought into it.
