What size tire goes on 24 inch rims?
There isn’t a single tire size that fits all 24-inch rims—the right size depends on the wheel width and the vehicle. Common examples include 245/35R24, 255/30R24, and 275/35R24, but exact fitment varies.
Understanding tire sizes requires reading the numbers on the sidewall: width, aspect ratio, and diameter. When a rim is specified as 24 inches in diameter, the tire’s inner diameter must match that 24-inch rim. The vehicle’s clearance, suspension geometry, and the manufacturer’s recommendations all influence which sizes are suitable. Using sizes outside the recommended range can affect handling, speedometer accuracy, and tire wear.
Key factors influencing tire size for 24-inch rims
Choosing a tire for 24-inch rims involves matching wheel width, overall diameter, and clearance with the vehicle’s setup. The following factors guide fitment:
- Rim width compatibility: Tire width must be within the wheel’s recommended range (e.g., 7.5–9.5 inches on many 24-inch wheels, though varies by model).
- Overall diameter and speedometer: Changing tire diameter affects mph/kph readings and gearing; manufacturers often specify acceptable ranges.
- Vehicle clearance: Full turn, suspension travel, fender clearance, and potential rubbing must be checked, especially with low-profile sidewalls.
- Load and speed ratings: Tires must meet or exceed the vehicle’s load index and speed rating; 24-inch rims are common on performance and luxury vehicles which demand higher ratings.
- Ride quality and handling: Larger or wider tires can alter ride stiffness, traction, and alignment requirements.
Concluding note: Always check the vehicle’s manual, the tire placard, and consult a tire professional to confirm that a given 24-inch tire size is appropriate for your specific make, model, and trim.
Common tire size ranges for 24-inch rims
Below are representative tire size patterns that are commonly used with 24-inch rims. The exact width and profile that works for your car depend on the wheel width and the maker’s fitment chart.
- 245/35R24
- 255/30R24
- 265/35R24
- 275/30R24
- 275/35R24
- 285/35R24
- 295/35R24
- 305/35R24
Concluding paragraph: These examples illustrate the common width and profile combinations used on 24-inch rims, but not every size will fit every vehicle. The right choice depends on wheel width, vehicle clearance, and manufacturer guidance.
How to determine the right size for your vehicle
To pick the correct tire size for 24-inch rims, follow these steps to ensure fitment, safety, and performance:
- Check your vehicle’s owner’s manual or the door jamb placard for the recommended tire sizes and the maximum wheel diameter.
- Measure your wheel width and verify it against the tire’s width range compatibility and the rim manufacturer’s specifications.
- Use a tire-size calculator or consult a tire professional to compare overall diameter changes, speedometer impact, and gearing implications.
- Test fit and verify clearance at full steering lock, suspension compression, and under load; confirm proper alignment and avoid rubbing on fenders or suspension components.
- Confirm load rating and speed rating meet or exceed the vehicle’s requirements and driving conditions.
Concluding note: After selecting a candidate size, have a professional mount and balance the tires and, if needed, adjust alignment to maintain optimal handling and wear.
Important safety and performance notes
Installing 24-inch tires can alter ride, acceleration, and braking characteristics. Always prioritize sizes recommended by the vehicle manufacturer or a tire professional, ensure fitment with the specific wheel width, and verify clearance under all driving conditions to avoid rubbing or component damage. Speedometer accuracy and ABS calibration may be affected by changes in overall tire diameter.
Summary
There is no universal tire size for 24-inch rims. The right tire size depends on wheel width, vehicle design, and clearance. Common 24-inch tire sizes include 245/35R24, 255/30R24, 265/35R24, 275/30R24, 275/35R24, 285/35R24, 295/35R24, and 305/35R24, among others. Always verify fitment with the vehicle's specifications and a tire professional before purchasing or mounting.
What size tires for 24 inch rims?
What size tires fit 24 inch rims? There are a wide variety of wheels that a 24" tire can accommodate. Some common sizes are 295/35R24, 305/35R24, 275/30R24 and 285/30R24. The exact size depends on the vehicle and the desired look.
Is a 275 tire the same as a 33?
No, a "275 tire" is not the same as a "33-inch tire" because the numbers represent different measurements in a tire's size. However, a specific metric size, such as a 275/60R20, can be nearly equivalent to a 33-inch diameter tire. The term "33" is a common, non-metric measurement for a tire's approximate overall diameter.
Tire size explained
- Metric size (e.g., 275/60R20): This is a precise measurement with three parts:
- 275: The width of the tire in millimeters.
- 60: The aspect ratio, which is the height of the sidewall as a percentage of the width (60% of 275mm).
- R20: The radial construction and the diameter of the wheel in inches.
- Non-metric size (e.g., 33x12.5R20): This is a common, more direct way to refer to a tire's approximate overall diameter:
- 33: The approximate total height of the tire in inches.
- 12.5: The width of the tire in inches.
- R20: The radial construction and the diameter of the wheel in inches.
When they are similar
- A 275/60R20 tire is a close equivalent to a 33-inch tire, with a total diameter of approximately 33 inches.
- Other metric sizes, like a 285/75R16, also result in a diameter close to 33 inches.
Why it matters
- Compatibility: Always check the exact metric size of a tire to ensure it will fit your vehicle and is compatible with your suspension and wheel size.
- Speedometer accuracy: Changing your tire diameter significantly can cause your speedometer to be inaccurate. For example, larger tires will make you appear to be driving faster than you actually are.
How tall is a 275 35 24 tire?
275/35R24 Tire Size Explanation
A 35-aspect ratio means that the tire's height is 35% of its width (in this case it is 96.25 mm / 3.79 inches).
What is 305 tire size in inches?
A "305" tire size itself is the tire's width in millimeters, so $305$mm is approximately 12 inches wide. The full tire size, such as 305/60R20305 / 60 cap R 20305/60𝑅20, includes more information: the "60" is the aspect ratio (height as a percentage of width), and the "20" is the wheel diameter in inches.
- Width: 305305305 millimeters is about 12.0112.0112.01 inches.
- Aspect Ratio: The "60" in a size like 305/60R20305 / 60 cap R 20305/60𝑅20 means the sidewall height is 60%60 %60% of the tire's width.
- Wheel Diameter: The "20" indicates the tire is designed to fit a 202020-inch wheel rim.
