What size Tyres are on a Cortina?
The Ford Cortina, a popular mid-sized car produced from the 1960s to the 1980s, typically came equipped with tires in the range of 165/70R13 to 185/70R13. The exact tyre size can vary depending on the specific model year and trim level of the Cortina.
Understanding Tyre Sizes
Tyre sizes are typically expressed in a format like 165/70R13, which provides key information about the tyre's dimensions:
- 165 - The tyre's width in millimetres
- 70 - The aspect ratio, which is the ratio of the tyre's sidewall height to the tread width
- R - Indicates a radial tyre construction
- 13 - The wheel diameter in inches that the tyre is designed to fit
So a 165/70R13 tyre would have a width of 165mm, a sidewall height that is 70% of the tread width, and be designed to fit a 13-inch wheel.
Tyre Sizes on the Ford Cortina
The Ford Cortina was available with a range of tyre sizes over its production run, but the most common were:
- 165/70R13 - A common size for earlier Cortina models in the 1960s and 1970s.
- 175/70R13 - A slightly wider tyre size used on some later Cortina models in the 1970s and 1980s.
- 185/70R13 - The largest factory-fitted tyre size for the Cortina, often found on higher-end trims or performance variants.
It's important to always refer to the vehicle's owner's manual or tyre placard when replacing tyres, as the recommended size may have changed over the model's production run.
What does Ford Cortina mean in English?
Ford Cortina was a car produced by Ford Motor Company from 1962 to 1982. It was named after the Italian ski resort of Cortina d'Ampezzo.
Why is Ford Cortina famous?
The Ford Cortina is one of Britain's iconic cars because of its very long production run. The underpinnings were used in Germany to make the Ford Taunus there. The badge may say 1600 but it actually has the 1.3-litre power unit.
What size tires are on the Model 3 OEM?
The 2019-2023 Standard Range Model 3 comes equipped with one of each 18 inch, 19 inch, and 20 inch tires. The sizes are as follows: 235/45R18, 235/40R19, and 235/35ZR20.
Why did Ford stop making the cortina?
Sales slumped in 1970, to almost half their 1969 peak, at 10,216 units. Ford USA dropped the model in 1970 and was effectively replaced with the introduction of the US-produced 1971 Ford Pinto subcompact.
What size tyres are on a MK3 Cortina?
Ford Cortina Mk3 Tyres
The MK3 Cortina from 1971 to 1975 offered 6.00-13 crossply tyres or 165R13 tyres. From 1976 the MK3 Cortina came with 165R13 radial tyres as standard.
What size are my rims and tires?
Open up the driver's door and look within the door jam or on the door itself and locate the sticker that has your tire information on it. Here you will find the wheel (rim) and tire size your vehicle came equipped with from the factory.
What is my factory tire size?
If you don't know your tire size, you can just read the sidewall of your current tires. It's suggested that you snap a photo or write it down somewhere safe. You can also find the sizing on your vehicle's door placard, which is a sticker that's typically located inside the driver's door.
What size are the wheels on a cortina?
The Ford Cortina has a number of different wheel and tyre options. When it comes to wheel size, these range from 13x4.
How many Mk4 Cortina are left?
Both Mk. 4 Cortina S models are now particularly rare with less than a dozen 2.0S and just 2 of the 2.3S models thought to survive today. Any Mk4 2.3 model is a very rare car in the UK now, with only about 20 remaining according to the DVLA. The S models were discontinued when Mk.
What stud pattern is cortina?
Common Stud Patterns
| NO. STUDS | PCD INCHES | TYPE |
|---|---|---|
| 4 | 4¼" | Escort/Cortina |
| 4 | 4½" | Most Japanese |
| 4 | 4¾" | |
| 5 | 4¼" | HT Holden |
