What transmission fluid does a 2010 Ford Ranger take?
The 2010 Ford Ranger, a compact pickup truck, requires a specific type of transmission fluid to ensure proper operation and longevity of the vehicle's transmission system. According to the manufacturer's recommendations, the 2010 Ford Ranger should use Motorcraft MERCON LV automatic transmission fluid.
Transmission Fluid Type
The 2010 Ford Ranger is equipped with a 5-speed automatic transmission. The recommended transmission fluid for this model is Motorcraft MERCON LV, which is a high-performance, low-viscosity automatic transmission fluid. 1 This fluid is designed to provide optimal lubrication, wear protection, and performance in Ford's 5-speed automatic transmissions.
Fluid Capacity
The total transmission fluid capacity for a 2010 Ford Ranger with a 5-speed automatic transmission is approximately 9.5 quarts (9 liters). 2 This is the amount of fluid that should be used when performing a full transmission fluid change or flush.
Fluid Change Interval
Ford recommends changing the transmission fluid in a 2010 Ranger at regular intervals to maintain optimal performance and prevent premature wear. The recommended fluid change interval is every 30,000 miles (48,000 km) or 2 years, whichever comes first. 3
It's important to follow the manufacturer's guidelines for transmission fluid maintenance to ensure the longevity and proper operation of the 2010 Ford Ranger's transmission system.
Is 4 quarts of transmission fluid enough?
You might need 3 to 5 quarts of fluid for a standard automatic transmission car. -Suvs or trucks may need 5 to 7 quarts or more. You'll need less for manual transmissions, about 2 to 4 quarts. Transmission, such as standard or CVT, also affects the kind and quantity of fluid.
What transmission does a 2010 Ford Ranger have?
Standard with each engine is five-speed manual overdrive transmission; a five-speed automatic with overdrive is optional.
What type of ATF does Ford use?
MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
What kind of transmission oil does a Ford Ranger take?
Capacities and Specifications
| Part | Recommended fluid | Specification |
|---|---|---|
| Engine oil - Diesel1 | SAE 5W-30 | WSS-M2C913-C WSS-M2C913-D |
| Engine oil - Diesel2 | SAE 5W-30 | WSS-M2C921-A WSS-M2C913-D |
| Engine oil - Diesel3 | SAE 0W-30 | WSS-M2C950-A |
| Transmission oil - Manual | Motorcraft® Dual Clutch Transmission Fluid | WSS-M2C200-D2 |
Can ATF 4 be used in Ford?
Mobil ATF+4 is not recommended for vehicles that require Ford Mercon® or General Motors Dexron® type fluids.
When did Ford switch to MERCON V?
1996 – MERCON V
In 1996, Ford released the Mercon "V" fluid specification (M2C202-B). Ford Technical Service Bulletin (TSB) 06-14-04 indicates that Mercon "V" is to replace the original Mercon fluid. This fluid was first used in the following transmissions: 1997 4R70W 4-speed automatic transmission.
Does it matter what transmission fluid I use?
So unless you're driving a car that's pushing 40, this isn't the type of ATF for you. Choosing the correct transmission fluid is critical to insuring the maximum performance and fuel economy from your car. Always check your owner's manual for the type of fluid recommended for your vehicle by the manufacturer.
How many quarts of transmission fluid does a 2010 Ford Ranger take?
Automatic Transmission Fluid
Capacity: 5 speed RWD 5R55E Total Fill 10 quarts.
What years did Ford Ranger have transmission problems?
Years to Avoid
- 2001 Ford Ranger. This model had 9 recalls, and was known for transmission problems.
- 2002 Ford Ranger. This model had 7 recalls and history of engine and transmission problems.
- 2004 Ford Ranger. This model had 8 recalls, and history of transmission and engine problems.
- 2005 Ford Ranger.
- 2006 Ford Ranger.
What color is the transmission fluid in a Ford Ranger?
Darker brick red: This is the normal color of transmission fluid. Deep blood red/rust red: Your vehicle will need servicing soon. Burnt/almost black: Your vehicle requires service immediately.
