What transmission fluid does a 2013 Ford Flex take?
As a car owner, knowing the right type of transmission fluid for your vehicle is crucial for maintaining its performance and longevity. The 2013 Ford Flex, a versatile and spacious SUV, requires specific transmission fluid to ensure smooth operation. In this article, we will explore the recommended transmission fluid for the 2013 Ford Flex and why using the correct fluid is essential.
Recommended Transmission Fluid
The 2013 Ford Flex is equipped with a 6-speed automatic transmission, and the manufacturer recommends using Mercon LV transmission fluid. This fluid is specifically designed to meet the performance requirements of Ford vehicles, ensuring optimal shifting and protection for the transmission components.
Why Use the Correct Transmission Fluid?
Using the correct transmission fluid is vital for several reasons:
- Performance: The right fluid ensures that the transmission operates smoothly, providing better acceleration and responsiveness.
- Protection: Proper fluid helps protect the transmission from wear and tear, extending its lifespan.
- Efficiency: Using the recommended fluid can improve fuel efficiency by reducing friction within the transmission.
- Warranty Compliance: Using the specified fluid helps maintain warranty coverage, as using incorrect fluids can void warranties.
In summary, using Mercon LV transmission fluid in your 2013 Ford Flex is essential for maintaining its performance and longevity. Always consult your owner's manual or a professional mechanic if you have any doubts about the type of fluid to use.
How to Change Transmission Fluid
If you're considering changing the transmission fluid yourself, here are the general steps to follow:
- Gather Supplies: You'll need Mercon LV transmission fluid, a transmission fluid pump, a wrench, and a drain pan.
- Prepare the Vehicle: Park the vehicle on a level surface and engage the parking brake.
- Drain Old Fluid: Locate the transmission drain plug, remove it, and allow the old fluid to drain completely into the pan.
- Replace Filter: If applicable, replace the transmission filter to ensure clean fluid circulation.
- Add New Fluid: Use the pump to add the new Mercon LV fluid through the dipstick tube or designated fill port.
- Check Fluid Level: Start the engine and let it run for a few minutes, then check the fluid level with the dipstick, adding more fluid if necessary.
Changing your transmission fluid regularly can help prevent costly repairs down the line. If you're unsure about performing this task, it's always best to consult a professional mechanic.
Frequently Asked Questions
How many quarts of transmission fluid does a Ford Flex hold?
Capacities and Specifications
| Item | Capacity |
|---|---|
| Automatic transmission fluid. | 12.15 qt (11.5 L)1 |
| Windshield washer fluid. | Fill as required |
| Fuel tank. | 18.5 gal (70 L) |
| A/C refrigerant (U.S. and Canada). | 21 oz (0.595 kg) |
What is the most common problem with the Ford Flex?
Top Ford Flex Problems
- Broken Center Console Latch. 102 people have reported this.
- Brake Noise – Front Grunting / Grinding. 78 people have reported this.
- Transmission (Red) or Power Transfer Unit (PTU) (Brown) Fluid Leaks at Axle Area.
- A/C Fan Speed Changing Constantly.
- Rear Brakes Drag, Make Rhythmic Sound.
Where is the transmission fluid dipstick on a 2013 Ford Focus?
there is a fill plug in the transmission it needs to be put up on a lift and lower engine shield removed then its filled through a plug in the transmission. this car does not have a dipstick or tube.
How much transmission fluid do I need for a Ford Focus 2013?
A 2013 Ford Focus transmission flush also uses about 10 quarts of fluid to specifically clean and flush out the system.
What type of transmission does a Ford Flex have?
6-speed 6F50 automatic
How much transmission fluid do I need to fill up?
In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much. It is advisable to put in little amounts at a time.
What ATF is compatible with Mercon?
Mercon V is also backwards compatible with Mercon and can be used in Mercon applications. For the many shifts and miles ahead, trust your transmission with Valvoline, the #1 automatic transmission fluid brand.
What type of ATF does Ford use?
MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
What transmission fluid does a 5.4 Ford take?
Capacities and Specifications - 5.4L V8
| Name | Specification |
|---|---|
| Power steering fluid and Automatic transmission fluid (U.S. and Mexico): Motorcraft® MERCON LV Automatic Transmission Fluid XT-10-QLVC | WSS-M2C938-A MERCON LV |
Can ATF 4 be used in Ford?
Mobil ATF+4 is not recommended for vehicles that require Ford Mercon® or General Motors Dexron® type fluids.
