What trucks use Dana 80 axles?
The Dana 80 is a heavy-duty axle commonly used in large trucks and commercial vehicles. Trucks that typically feature Dana 80 axles include heavy-duty pickups, medium-duty trucks, and some off-road vehicles.
What is the Dana 80 Axle?
The Dana 80 is a robust, full-floating rear axle assembly produced by Dana Incorporated, a major automotive parts manufacturer. It is designed for high-strength and heavy-duty applications, capable of handling large payloads and towing capacities. The Dana 80 axle is known for its durability and is often found in trucks that need to handle demanding tasks like hauling heavy loads or traversing rugged terrain.
Trucks with Dana 80 Axles
Some of the trucks that commonly use Dana 80 axles include:
- Heavy-Duty Pickups: Trucks like the Ford F-250 and F-350 Super Duty, Chevrolet Silverado 2500HD and 3500HD, and Ram 2500 and 3500 often feature Dana 80 rear axles to handle their increased towing and hauling capabilities.
- Medium-Duty Trucks: Larger commercial trucks, such as the Ford F-450 and F-550, Chevrolet Silverado 4500HD and 5500HD, and Ram 4500 and 5500, commonly use Dana 80 axles to support their heavier payloads.
- Off-Road Vehicles: Some off-road-focused vehicles, like the Jeep Wrangler Rubicon, may also be equipped with Dana 80 axles to provide the necessary strength and durability for challenging terrain.
The Dana 80 axle is a popular choice for these types of trucks due to its robust design, high load capacity, and proven reliability in heavy-duty applications.
How to tell if you have a Dana 70 or 80?
The 80 has the passenger side shock mount forward of the axle where the dana 70 has both shock mounts integrated into the rear of the u bolt plate. Another major difference is the fact that the 70 uses studs on the bottom to hold the shocks and the 80 has u brackets that require bolts.
What trucks have a Dana 80?
Common applications
- 1988-1998 F-350 DRW (Select chassis cabs and pick ups)
- 1999-2016 F-350 DRW.
- 1988-2004 F-450.
- 2011-2014 F-450 (13,050 GVW)
Is a Dana 70 stronger than a Dana 60?
While a . 2″ difference in diameter between the Dana 60 and the Dana 70 doesn't seem like it would matter much, it matters a great deal. The torque rating for a stock Dana 70 axle shaft is 8966 ft/lbs, which is almost 50% stronger than the stock Dana 60 axle shaft, which has a rating of 6044 ft/lbs.
What is a Dana 80 rated for?
The Dana 80 is only rated for 1 ton trucks, not a 2.5 ton truck. A F550 is rated to haul more than a M35a2. But a lower GVWR and lighter weight truck.
What vehicles did a Dana 80 come in?
Common applications
- 1988-1998 F-350 DRW (Select chassis cabs and pick ups)
- 1999-2016 F-350 DRW.
- 1988-2004 F-450.
- 2011-2014 F-450 (13,050 GVW)
Is the Dana 80 better than the Dana 70?
Dana 70s are also good but have comparatively limited ratio and locker availability, while Dana 80s are generally overkill and can hurt ground clearance more than the others. But if you're strictly wanting to know which one is the strongest and can carry the most weight, it's the Dana 80.
How much torque can a Dana 80 handle?
It has an 11,000-pound gross axle weight rating and a continuous manufacturer's output torque rating of 2,500 lb-ft.
What is a Dodge 9.25 rear end?
The Chrysler 9.25" rear axle is commonly found in Dodge cars and trucks. They use a 9.25" ring gear and run 31 spline axle shafts. A front version of this axle was offered as well, however, it used reverse rotation gears and 33 spline axle shafts to the internal parts are not compatible.
Which is stronger, 14 bolt or Dana 80?
Dana 80 Vs 14 Bolt 🧐 The Dana 80 is stronger, but the 14bolt is a better design for sure, particularly the pinion support.
What truck came with a Dana 80?
The Dana 80 Trac Lok is unique being it is a 4 pinion unit, unlike other Dana Trac Lok units with 2 pinions. This was the only rear axle available for the 2nd generation Dodge Ram 3500 trucks.
