What type of oil does a 2009 Ford Flex take?
For the 2009 Ford Flex, the engine requires 5W-20 motor oil, and you can use either a synthetic blend or a full synthetic variant. The typical oil capacity with a filter is about 6 quarts. Always confirm exact requirements in the owner’s manual for your VIN and driving conditions.
The 2009 Flex uses a 3.5-liter V6 with variable timing, and Ford’s lubrication guidance centers on a lightweight 5W-20 grade designed for reliable cold starts and efficiency. This article breaks down the approved oil options, capacity, and typical maintenance intervals to help you keep the engine properly lubricated.
Oil types and specifications
Approved oil options
Listed below are the oil types commonly approved for the 2009 Ford Flex. Use the option that matches your maintenance plan while ensuring the oil remains 5W-20.
- 5W-20 synthetic blend motor oil
- 5W-20 full synthetic motor oil
Either option meets the 5W-20 grade requirement and Ford’s current specifications for this engine. When in doubt, verify the exact specification with your owner's manual or a Ford dealership to ensure compatibility with your specific vehicle.
Capacity and maintenance intervals
Capacity and change intervals explained
Before performing a change, know the general capacity and how often to service the oil so you can plan accordingly.
- Oil capacity with filter is approximately 6 quarts (about 5.7 liters).
- Replace the oil filter with every oil change.
- Oil-change interval is typically 5,000 miles with conventional oil and up to 7,500 miles with synthetic oil, depending on normal driving conditions. In severe or demanding conditions, more frequent changes may be recommended.
- After adding new oil, recheck the level with the dipstick to ensure it sits within the proper range.
Sticking to these guidelines helps maintain proper lubrication, engine cleanliness, and long-term reliability of the 3.5L V6 in the Ford Flex.
Summary
In short, a 2009 Ford Flex uses 5W-20 motor oil, available as either a synthetic blend or a full synthetic. The engine holds about 6 quarts of oil with a filter, and typical change intervals range from 5,000 miles for conventional oil to 7,500 miles for synthetic oil, with adjustments based on driving conditions. Always consult the owner’s manual for your specific vehicle and follow the recommended maintenance schedule.
What type of oil for a 2009 Ford Flex?
STP Full Synthetic Engine Oil 5W-20 5 Quart.
What kind of oil goes in a Ford Flex?
The Ford Flex oil type is generally 5W-20 or 5W-30, depending on the model year and specific engine. For colder climates, some models may require 0W-30 oil, and it's crucial to check your owner's manual for the exact recommendation and any specific certifications (like WSS-M2C961-A1). The oil capacity is typically 6 quarts, but this can vary by model, so always check your manual before changing the oil.
General oil recommendations
- Standard: Use 5W-20 or 5W-30.
- Cold Climate: Use 0W-30 if temperatures are consistently below -22∘Fnegative 22 raised to the composed with power cap F−22∘𝐹 (-30∘Cnegative 30 raised to the composed with power cap C−30∘𝐶).
- Capacity: The typical capacity is 6 quarts, but confirm with your owner's manual for your specific model.
How to determine the correct oil
- Consult your owner's manual: This is the most reliable source for your vehicle's specific needs.
- Check the oil cap: The correct viscosity is often printed on the oil filler cap.
- Consider your climate: The viscosity recommended for your vehicle may change based on your local temperature range.
Can I use 5W-30 instead of 5W20 in my Ford Escape?
Oil viscosity is only really relevant when you're under manufacturer's warranty. After warranty you can use whatever you want. I have a 2017 which calls for 5W20, but I use 5W30.
How many quarts of oil does a 2009 Ford Flex 3.5 L take?
Mind. Up top under the hood. If you have an engine. Cover you may or may not need to remove it ours does not have it.
