What windshield wipers does a Toyota Corolla take?
The driver-side blade on most Toyota Corollas is 26 inches, with the passenger-side blade typically 16 to 17 inches. Exact sizes depend on the model year and trim, so it's best to verify for your specific car.
Current-generation Corollas (2019–present)
This is the 12th generation, sold in recent years, and it uses standard blade sizes commonly recommended for this period.
- Driver-side blade: 26 inches
- Passenger-side blade: 16 inches
For accuracy, confirm the exact sizes in your owner's manual or by using a parts retailer search for your specific year, trim, and region.
Earlier generations
Earlier Corolla generations varied more in blade sizes. The following reflects typical configurations for well-known prior generations.
11th generation (2014–2018)
Most 11th-generation Corollas use a 26-inch driver-side blade and a 17-inch passenger-side blade.
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
Always verify with the manual or a reputable parts retailer for your exact model and year.
10th generation (2007–2013)
A common setup for the 10th generation was a 24-inch driver-side blade and an 18-inch passenger-side blade.
- Driver-side blade: 24 inches
- Passenger-side blade: 18 inches
If your Corolla falls outside this range, check the owner’s manual or an official parts diagram to confirm the correct sizes.
Summary
In short, modern Corollas typically use a 26-inch driver blade with a 16-inch passenger blade, while some older generations used 26"/17" or 24"/18" configurations. Since exact sizes can vary by year and trim, always verify with your owner’s manual or a trusted parts retailer by entering your specific year, model, and region.
