What years did Ford use an A4LD transmission?
The Ford A4LD transmission was used in various Ford vehicles from the mid-1980s through the late 1990s. This automatic transmission was a popular choice for many Ford models during that time period.
Years the A4LD Transmission Was Used
According to the information gathered, the Ford A4LD transmission was used in the following years:
- Mid-1980s to late 1990s
- Specifically, the A4LD was used in Ford vehicles from around 1985 to 1997,
The A4LD was a 4-speed automatic transmission that was commonly found in Ford's rear-wheel-drive vehicles during this time period, including the Ford Mustang, Ford Thunderbird, and Ford F-150 pickup truck,.
Reasons for the A4LD's Popularity
The A4LD transmission was a reliable and cost-effective option for Ford, which helped contribute to its widespread use across many of their models in the 1980s and 1990s. It provided a good balance of performance and fuel efficiency for the vehicles it was paired with,.
Overall, the Ford A4LD transmission was a significant component in many Ford vehicles during the mid-1980s through the late 1990s, helping to power a variety of the automaker's popular models during that time period.
What transmission is in a Ford Pinto?
| Ford Pinto | |
|---|---|
| Transmission | 4-speed manual 3-speed C3/"Selectshift/Cruise-O-Matic" automatic |
| Dimensions | |
| Wheelbase | 94.0 in (2,388 mm) |
| Length | 163 in (4,140 mm) |
What is the gear ratio of the A4LD?
Transmisison Gear Ratio Chart
| Transmission | 1st | 4th |
|---|---|---|
| FORD A4LD | 2.47 | 0.75 |
| FORD A4LDE | 2.47 | 0.75 |
| FORD A5LDE | 2.47 | 1.00 |
| FORD AOD | 2.40 | 0.67 |
How to identify A4LD transmission?
A4LD: The A4LD is identified by a âTâ transmission code. The overall length of this transmission is 28.687â.
Which engines connect to an A4LD?
Can you swap between the 2.3, 3.0, and the 4.0 engines? Yes all 85-94 Rangers (2.3 and 3.0) and 95-96 Explorer 4.0 use the A4LD. I think newer 2000 maybe Ranger 2.5L will also work with an A4LD.
What vehicles used the A4LD transmission?
A4LD. The C3 was modified into the A4LD four-speed by adding an overdrive gear, which the C3 lacked. This transmission was introduced in Europe on the 1985 Ford Scorpio and in North America with the 1985 Bronco II and Ranger, again with four- and six-cylinder engines only. It was replaced by the 4R44E and 4R55E in 1995 ...
Is the A4LD reliable?
As most of the early overdrive auto trannies, the A4LD was not real reliable in the early years. The first major change came with the introduction of the 4.0 in 1990. While still an A4LD, the 4.0 version was significantly stronger than the non 4.0 versions. It also had a computer controlled torque converter lock-up.
What years did Ford use A4LD transmission?
The A4LD four speed overdrive transmission was introduced in the 1985 Bronco II/Ranger and saw use behind many 4 and 6 cylinder engines until the 1995 model year when it was replaced by the 4R44E and 4R55E electronic transmissions.
What applications did the A4LD transmission have?
This transmission was used in light duty Ford applications with 4.0L and smaller engines like Ranger, Explorer, Bronco II, Aerostar, and Mustang. Specifically, this transmission was used behind 2.3L and 2.5L 4 cylinder engines as well as 2.8L, 2.9L, 3.0L, and 4.0L 6 cylinder engines.
When did Ford start using 10R80?
2017
Ford and General Motors began collaborating on the project in the early 2010s, aiming to create a transmission offering more gears and better performance than existing models. The result was the 10R80, first introduced in 2017 in the Ford F-150 and has since been incorporated into a range of other vehicles.
How do I tell which Ford transmission I have?
You can find your transmission type on your window sticker, a Build Sheet, or a Vehicle Identification (VIN) Decode Letter. To find the transmission types on any of our current models: Visit the Ford website. Click on Vehicles to select a vehicle.
