Loading

Where is the ACC sensor located?

The ACC (Accelerator Control Sensor) is a critical component in modern vehicles that monitors the position of the accelerator pedal. Its primary function is to provide the engine control unit (ECU) with information about the driver's intended acceleration, allowing the engine to respond accordingly. The location of the ACC sensor can vary depending on the make and model of the vehicle, but it is typically found in close proximity to the accelerator pedal.


Understanding the Role of the ACC Sensor


The ACC sensor is responsible for translating the driver's input on the accelerator pedal into an electronic signal that the ECU can interpret. This signal is then used by the ECU to adjust the engine's fuel delivery, ignition timing, and other parameters to provide the desired acceleration. The ACC sensor is a crucial component in ensuring smooth and responsive acceleration, as well as maintaining optimal engine performance and fuel efficiency.


Common ACC Sensor Locations


The ACC sensor is typically located in one of the following areas:



  • Under the Accelerator Pedal: The most common location for the ACC sensor is directly underneath the accelerator pedal, where it can accurately measure the pedal's position and movement.

  • On the Throttle Body: In some vehicles, the ACC sensor may be integrated into the throttle body, which is the component that controls the amount of air entering the engine.

  • Near the Pedal Assembly: In some cases, the ACC sensor may be located near the accelerator pedal assembly, but not directly underneath it, to minimize interference from other components.


Regardless of the specific location, the ACC sensor is designed to be easily accessible for maintenance and replacement, as it is a critical component in the vehicle's engine management system.


Diagnosing ACC Sensor Issues


If the ACC sensor is not functioning correctly, it can lead to a variety of issues, such as poor acceleration, engine stalling, or even the illumination of the check engine light. In such cases, it is important to have the vehicle diagnosed by a qualified mechanic, who can use diagnostic tools to identify the root cause of the problem and recommend the appropriate repair or replacement of the ACC sensor.

Where is the front assist sensor located?


Where is the Front Assist sensor located? Most Volkswagen vehicles equipped with Front Assist have a single sensor located behind the VW emblem or below the VW emblem in the center of the bumper cover.



What causes the adaptive cruise control to stop working?


Any issues with your car's electrical components can cause the cruise control to stop working. These issues could be something as simple as a loose wire or connector, or something more complicated like a damaged alternator, starter, or electrical short circuit.



Where is the collision mitigation sensor located?


How Does Collision Mitigation Braking Work? The CMBS utilizes a radar sensor in the grille and a front-facing camera located behind the rearview mirror to help detect other vehicles and pedestrians on the road ahead.



How to fix acc unavailable?


Clean the radar sensor. The view of the radar sensor is impaired by add-on parts, the trim frames of number plate holders or stickers. Keep the area around the radar sensor free.



Which sensor is required for adaptive cruise control?


A radar sensor is usually at the core of the adaptive cruise control (ACC). Installed at the front of the vehicle, the system permanently monitors the road ahead. As long as the road ahead is clear, ACC maintains the speed set by the driver.



How much does an adaptive cruise control sensor cost?


$900 to $1,300: Radar sensors for adaptive cruise control and automatic emergency braking systems.



Where is the ACC FCW sensor?


The forward looking radar eye is the black orb below your front bumper. It is integral to the Adaptive Cruise Control and Forward Collision Warning/Automatic braking. If the sensor is dirty it can interfere with the radar signals it sends and receives (just like the radar at airports and on airplanes).



Where are adaptive cruise control sensors located?


The Adaptive Cruise Control camera is located behind the windshield in front of the rearview mirror. It's important to keep the windshield clean for the camera to work properly. On some vehicles, the feature also uses radar sensors located in the front grille or bumper. Keep these areas of the vehicle clean.



How to fix an adaptive cruise control problem?


Here are the steps to reset adaptive cruise control (ACC).

  1. Step 1: Consult Your Vehicle's Owner's Manual.
  2. Step 2: Start Your Vehicle.
  3. Step 3: Access the ACC Menu.
  4. Step 4: Select 'Reset' or 'Default'
  5. Step 5: Press and Hold the Reset Button.
  6. Step 6: Confirm the Reset.
  7. Step 7: Monitor System Reset.
  8. Step 8: Verify ACC Reset.



Where is the forward collision sensor?


The Intelligent Forward Collision Warning system uses a radar sensor located in the front of the vehicle to measure the distance between the two cars ahead, as well as their relative speed.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.