Where is the fuel reset button on a 2007 Ford Explorer?
The fuel reset button, also known as the inertia switch, is a safety feature in many vehicles, including the 2007 Ford Explorer. It is designed to cut off the fuel supply in the event of a collision or sudden impact, preventing potential fuel leaks and fires. If your vehicle won't start after a minor accident or a sudden jolt, resetting this button might solve the issue. Here's where you can find it and how to reset it.
Location of the Fuel Reset Button
In the 2007 Ford Explorer, the fuel reset button is typically located in the passenger-side footwell. Specifically, you can find it:
- Behind the kick panel on the passenger side.
- Near the front of the door frame, close to where the carpet meets the panel.
- It is often covered by a small access panel or flap for protection.
Once located, the button is usually red or black and can be pressed to reset the fuel system.
Steps to Reset the Fuel System
If you suspect the fuel reset button has been triggered, follow these steps to reset it:
- Turn off the ignition and ensure the vehicle is in park.
- Locate the fuel reset button in the passenger-side footwell.
- Press the button firmly until you hear or feel a click.
- Turn the ignition back on and check if the vehicle starts.
- If the vehicle still doesn’t start, check for other issues such as a blown fuse or a drained battery.
After resetting the button, your fuel system should be operational again. If the problem persists, it may indicate a more serious issue that requires professional attention.
When to Seek Professional Help
While resetting the fuel button is a straightforward process, there are situations where you might need to consult a professional mechanic:
- If the button keeps triggering without any apparent reason.
- If the vehicle still won’t start after resetting the button.
- If you notice fuel leaks or other safety concerns.
In such cases, it’s best to bring your vehicle to a trusted auto repair shop to diagnose and resolve the issue. At Kevin's Autos, we specialize in diagnosing and repairing fuel system problems, ensuring your vehicle is safe and reliable.
Conclusion
The fuel reset button in a 2007 Ford Explorer is a critical safety feature that can be easily reset in most cases. By following the steps outlined above, you can quickly restore your vehicle’s fuel system. However, if the issue persists, don’t hesitate to seek professional assistance to ensure your vehicle is in top condition.
Frequently Asked Questions
Where is the TPMS reset button on a Ford?
Press and hold the TPMS reset button, typically found beneath the steering wheel, and let the light blink three times before releasing it. Wait 20 minutes to allow the sensor to refresh.
Where is the fuse for the fuel pump switch?
See if you can hear the fuel pump. Run. If you cannot hear the fuel pump run then you need to locate the fuse and the relay. And refer to the owners manual to determine their location.
What button do I press to reset fuel sensor?
Or have a symbol resembling a gas pump. 2. Turn the ignition on insert your key into the ignition. And turn it to the on position. You don't need to start the engine for this process.
How do you reset the fuel shut off switch on a Ford?
The fuel pump shut-off switch is located behind an access panel on the right side of the luggage compartment. The fuel pump shut-off switch has a red reset button on top of it.
Where is the fuel reset button on a Ford Explorer?
The fuel pump shut-off switch is located behind an access panel in the right rear quarter trim panel, near the liftgate. The fuel pump shut-off switch has a red reset button on top of it.
Where is the fuel pump reset switch located?
The switch is typically located behind a piece of plastic. This can be your glove box storage bin or near the footrest area. Removing these components might require some elbow grease or tools like screws. The fuel shut off switch's location can also be dark and difficult to reach.
Where is the TPMS reset button on a 2007 Ford Explorer?
Locate the TPMS reset button (usually beneath or near the steering wheel), and hold it until the light on the dashboard blinks three times. Release the button, start the ignition, and the light should be off. Add air to all tires (including the spare tire) to 3 PSI over the recommended amount.
Where is the TPMS reset button located?
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it's there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Where is the reset button on a Ford?
All cars, regardless of the manufacturer, have reset buttons located on the glass of the dashboard. It's located on the left edge of your dashboard. This is the same for Ford cars too. The reset button should be located on the dashboard, which is on the left side.
What is a fuel reset button?
This is our inertia safety switch part number iner sw and its purpose is to shut off the power to your fuel pump in the event of a crash or collision it's designed to be mounted on a vertical surface
