Where is the jack located on a 2002 Trailblazer?

The jack on a 2002 Trailblazer is typically located under the front passenger seat or in the rear cargo area. The exact location may vary slightly depending on the specific model and trim level of the Trailblazer.

Detailed Explanation

The 2002 Chevrolet Trailblazer is a mid-size SUV that was part of the Trailblazer lineup produced from 2002 to 2009. The jack, which is a tool used to lift the vehicle in the event of a flat tire, is an essential component that comes standard with the Trailblazer.

Jack Location

On the 2002 Trailblazer, the jack is typically located in one of two places:

• Under the front passenger seat: The jack is often stored in a designated compartment or tray located under the front passenger seat, making it easily accessible.


• In the rear cargo area: Alternatively, the jack may be stored in the rear cargo area, usually in a designated storage compartment or under the floor.

The exact location of the jack can vary depending on the specific model and trim level of the 2002 Trailblazer. It's important to familiarize yourself with the location of the jack in your vehicle, as you may need to access it in the event of a flat tire or other emergency situation.

Accessing the Jack

To access the jack, you will typically need to remove any covers or panels that are covering the storage compartment. Once you've located the jack, you can follow the instructions provided in your vehicle's owner's manual to properly use it to lift the Trailblazer and change the tire.

It's a good idea to periodically check the condition of the jack and ensure that it is in working order, as you may need to rely on it in an emergency situation.

How much is a 2002 Trailblazer worth today?

The value of a 2002 Chevy Trailblazer varies significantly, but its private party value is generally between $700 and $1,400, with an average trade-in value in the $500 to $1,100 range. The actual value depends on the vehicle's specific trim, condition, mileage, and features. For example, a high-mileage LS might be worth around $742 (rough condition) to $1,089 (outstanding condition), while a high-end LTZ could be worth more. 
Factors that influence value

• Condition: The overall condition, from "rough" to "outstanding," is a major factor. A vehicle in poor condition will be worth less than one that is well-maintained. 
• Mileage: Higher mileage vehicles will have a lower value. 
• Trim level: Higher trim levels, like the LTZ, generally have a higher value than base models like the LS. 
• Features: Options like four-wheel drive, a towing hitch, and other premium features can increase the value. 
• Location: The value can differ depending on your geographic location. 
• Private Party vs. Dealer: A private party sale will likely result in a higher price for the seller compared to a dealer trade-in, which will be lower. 

Estimated values

• Private Party Value:
  • Rough: ~$742
  • Average: ~$898
  • Clean: ~$1,017
  • Outstanding: ~$1,089
• Trade-In Value:
  • Rough: ~$632
  • Average: ~$798
  • Clean: ~$897
  • Outstanding: ~$958 

Note: These are just estimates. For a more precise valuation, consider using a vehicle appraisal tool or getting quotes from multiple dealers.

How to locate a jacking point?

To identify jack points, check your owner's manual for diagrams, or look for reinforced metal areas on the car's frame, typically along the side rails just behind the front wheels and in front of the rear wheels. These spots are often marked with notches, arrows, or indentations designed to fit your jack. 
You can also check out this video:55sGirlie GarageYouTube · Jun 23, 2025
General indicators of jack points
You can also check out this video:32sScotty KilmerYouTube · Apr 13, 2011

• Owner's Manual: The most reliable source for specific locations. It will have diagrams showing the exact spots for your vehicle. 
• Markings: Many manufacturers include arrows, cutouts, or other markings pointing to the correct jacking location. 
• Pinch Welds: Look for a thick metal ridge, or pinch weld, along the side of the car's undercarriage. The jacking points are usually just behind the front wheels and in front of the rear wheels along this seam. 
• Frame Rails: For SUVs, trucks, and some other vehicles, the frame rails—sturdy metal beams running along the length of the car—are the correct jacking points. Always confirm this is safe to do with your owner's manual. 
• Reinforced Areas: Jack points are structurally reinforced, so they will feel more solid than surrounding parts. They are often doubled-up metal or have a special cutout or notch for the jack saddle. 

You can also check out this video:1mWay of the WrenchYouTube · Oct 29, 2020
What to avoid

• Soft or flimsy parts: Never place a jack on a plastic body panel, the exhaust system, the oil pan, or any suspension components. These parts can bend, break, or cause the car to slip. 
• Unsure locations: If you are unsure, do not guess. Look for clear, reinforced points. Using the wrong spot can damage your vehicle. 

You can also check out this video:49sLive FreeYouTube · Jun 29, 2018

What is the most common problem with the Chevy Trailblazer?

The most common problems are with the ignition system, infotainment system, braking system, noise, and vibration.

How to use a Chevy Trailblazer jack?

Preparing Your Chevy for the Lift: Essential Safety Steps

1. Choose a Flat, Stable Surface.
2. Engage the Parking Brake.
3. Inspect Your Jack and Jacking Points.
4. Loosen the Lug Nuts (Optional)
5. Place Wheel Chocks.
6. Position the Jack Under the Correct Points.
7. Lift the Vehicle Slowly.
8. Locate the Jacking Points.