Where to find paint code on Ford Ranger?
The exterior paint code for a Ford Ranger is usually found on the driver’s side door jamb sticker, but it can also appear on other labels depending on the year and trim. It’s a small alphanumeric code used to identify the factory color for touch-ups or repaints.
Common locations to check
Use the following locations to locate the exterior color code on most Ford Rangers. Note that location can vary by year and model.
- Driver’s-side door jamb sticker: Open the driver's door and inspect the door frame for a label that lists Exterior Paint, Color, or a two-letter/three-character code.
- Passenger-side door jamb sticker: Some models place a second label on the passenger door or B-pillar with the color code.
- Glove box lid or inside glove box: Certain years place the color code on a label on the inner lid or on the box itself.
- Under the hood near the radiator support or firewall: A small sticker may appear in the engine bay with the exterior color code.
- VIN-based dealer lookup: If you cannot locate a label, use your VIN to have a Ford dealer or trusted shop retrieve the exact paint code from Ford’s system.
If you still cannot find the code after checking these spots, consult the owner’s manual for year-specific label locations or call a Ford dealer with your VIN. The color code is essential for ordering touch-up paint or a complete color match.
How to use the paint code
The paint code is typically two or three characters, sometimes a combination of letters and numbers. Use it when ordering factory-matched touch-up paint, or provide it to body shops to ensure a precise color match. Cross-reference with Ford’s color charts or your local dealer to confirm the exact shade, especially for tri-coat or pearl finishes.
Summary
To locate the exterior paint code on a Ford Ranger, start with the driver’s door jamb sticker, then check the glove box and engine bay labels, and don’t hesitate to use the VIN to obtain the code from Ford or a dealer if labels are missing.
