Loading

Why is my brake system light on my Honda?

If the brake system warning light is illuminated on your Honda's dashboard, it indicates a potential issue with your vehicle's braking system. This light serves as an important alert, prompting you to have the problem diagnosed and addressed as soon as possible for your safety and the proper functioning of your car.


Common Causes of the Brake System Light Turning On


There are several common reasons why the brake system light may be illuminated in your Honda:



  • Low Brake Fluid Level: If the brake fluid level in the master cylinder reservoir is low, it can trigger the brake system warning light. This could be due to a leak in the brake lines or worn brake pads that have caused the fluid level to drop.

  • Brake Pad Wear: As your brake pads wear down over time, the brake system light may turn on to indicate that the pads need to be replaced. This is a safety feature to alert you to have the brakes serviced.

  • Brake Caliper Issues: A problem with one of the brake calipers, such as a seized or stuck caliper, can also cause the brake system light to illuminate.

  • Antilock Brake System (ABS) Malfunction: If there is an issue with the ABS system, such as a faulty sensor or wiring problem, the brake system light will turn on to indicate the problem.

  • Parking Brake Engagement: If the parking brake is partially or fully engaged, it can trigger the brake system warning light.


It's important to have the cause of the brake system light diagnosed and addressed as soon as possible to ensure the safe and proper functioning of your Honda's braking system.


Steps to Troubleshoot the Brake System Light


If the brake system light is illuminated in your Honda, here are the steps you can take to troubleshoot the issue:



  1. Check the Brake Fluid Level: Open the brake fluid reservoir and visually inspect the level. If it is low, top it up with the recommended brake fluid type for your Honda model.

  2. Inspect the Brake Pads: Visually check the thickness of the brake pads. If they are worn down, have them replaced by a qualified mechanic.

  3. Check for Brake Caliper Issues: Inspect the brake calipers for any signs of sticking or binding. If a caliper is malfunctioning, it will need to be repaired or replaced.

  4. Scan for ABS Codes: Use an OBD-II scanner to check for any diagnostic trouble codes related to the ABS system. This can help identify the specific issue causing the brake system light to turn on.

  5. Verify the Parking Brake is Fully Released: Ensure the parking brake is completely disengaged, as a partially engaged parking brake can trigger the brake system warning light.


If you are unable to resolve the issue or the brake system light remains illuminated, it is recommended to have your Honda inspected by a qualified mechanic who can diagnose and repair the underlying problem.

What is the first thing you should check if your brake dashboard light is on?


So as soon as that light comes on you want to make sure you pull over to a safe location. All right when you're pulled over safely the first thing I would do is check the parking brake just make sure



What 2 reasons would cause your brake system warning light to come on?


Why is the brake light on while driving? When your brake light comes on, your car is letting you know that either your vehicle is low on brake fluid, the emergency brake is activated, there's trouble within the ABS unit, or there's a problem with the sensors.



What does Honda brake system light mean?


If your brake service warning light is always on, it could be due to a need for parking brake adjustment, worn brake pads, or hydraulic issues. If your brake service warning light turns on when you hit the pedal, it could be due to hydraulic loss on one side of your vehicle or low brake fluid in the master cylinder.



How to fix a brake system problem?


The solution is to replace worn brake pads with quality new ones and check the surface of the brake discs to ensure they are in good condition. Similarly, loss of pressure in the brake system can be due to brake fluid leaks, air in the system or problems with the master cylinder.



Can I drive with a braking system fault?


Brakes are the most important safety feature on your vehicle, so you should not drive if your brakes are not working properly.



Can I drive with brake system warning light?


BRAKE WARNING LIGHT = BRAKE SYSTEM PROBLEM
Any brake system problem has to be regarded as a major safety issue and your car should not be driven until the problem has been resolved by a mechanic.



How to fix brake system warning light?


How Do You Fix a Brake Light Warning?

  1. Pull Over Safely.
  2. Restart the Vehicle and/or Dashboard.
  3. Replace the Brake Pads.
  4. Check the Brake Fluid.
  5. Check or Replace the Bulbs.
  6. Stop the vehicle and check the Parking Brake.
  7. Take Your Car to an Auto Shop.
  8. Recent Articles.



Why is my brake light on but brakes work fine?


If your brake service warning light is on, it could indicate hydraulic issues, worn brake pads, or a need for parking brake adjustment. Because the brake service warning light could mean different things, it is best to have a brake specialist diagnose the issue.



Why does my Honda say check brake system?


When your Honda Civic car displays a “Check Brake System”, it indicates some potential issues with the braking system, which need immediate attention. This warning can indicate various issues with your vehicle's braking system, ranging from minor maintenance needs to potentially serious safety concerns.



How to fix brake system light?


How Do You Fix a Brake Light Warning?

  1. Pull Over Safely.
  2. Restart the Vehicle and/or Dashboard.
  3. Replace the Brake Pads.
  4. Check the Brake Fluid.
  5. Check or Replace the Bulbs.
  6. Stop the vehicle and check the Parking Brake.
  7. Take Your Car to an Auto Shop.
  8. Recent Articles.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.