Does Can-Am and Honda have same bolt pattern?
Short answer: Not typically. Can-Am and Honda generally do not share the same lug pattern across their ATV/UTV lineups, and wheels are usually model- and year-specific. If you need cross-brand compatibility, you’ll likely need adapters and careful matching of hub bore, PCD, lug size, center bore, and thread pitch.
The differences in wheel attachment standards reflect variations in OEM design decisions across brands and model generations. This article breaks down what to know, how to check, and practical steps to determine compatibility.
Bolt-pattern basics
Wheel bolt patterns, or PCD (pitch circle diameter), refer to the number of lug studs and the circle they define on the hub. The center bore must also match for proper seating, and the lug size and thread pitch must be compatible with the wheel studs.
When comparing brands and models, you will encounter common patterns such as 4-lug setups and 5-lug setups, with various diameters like 4x110, 4x137, 5x110, etc. Always confirm both the bolt pattern and the hub bore before attempting mounting.
Can-Am bolt-pattern overview by model
Can-Am's ATV/UTV line uses a variety of lug patterns across different generations and platforms. The most common configurations are not universally shared with Honda. Always verify the exact pattern for the year and model you are working with from official manuals or dealership data.
Note: Specifications vary by model year; some wheels from Can-Am may interchange with other BRP brands or third-party vendors with adapters, but this is not a guarantee and requires precise measurements and professional installation.
Honda bolt-pattern overview by model
Honda's ATVs and side-by-sides also use multiple lug patterns depending on model and year. There is no single Honda standard that guarantees cross-brand compatibility with Can-Am wheels. Confirm the bolt pattern using the specific model's service manual or dealer data.
As with Can-Am, cross-brand compatibility typically requires adapters, and you must ensure that all mechanical tolerances are satisfied and safety standards are met.
How to verify compatibility in practice
Before attempting to swap wheels between brands, follow these steps to verify fit and safety. The steps below can be used for Can-Am and Honda alike.
To guide your checks, gather and verify the following data:
- Identify the exact model-year and trim of both the vehicle and wheel you want to swap. Documentation matters for bolt pattern accuracy.
- Count the number of lug studs (or bolts) and measure the diameter of the circle they define (PCD). Common options include 4-lug and 5-lug patterns with various diameters (e.g., 110 mm, 137 mm, etc.).
- Measure the center bore diameter to ensure the wheel seats on the hub without spacers or rings. If the bore is too small, it will not mount properly; if too large, hub-centric rings may be required.
- Check the lug stud size and thread pitch; mismatches can cause improper torque and mounting failure.
- Check for brake caliper clearance and suspension clearance to ensure the wheel fits without rubbing or interference.
With these checks complete, you can decide whether to attempt a cross-brand wheel swap or seek brand-specific wheels.
Practical note on fitment decisions
Even when patterns appear to match, minor differences in hub geometry or offset can affect torque, brake clearance, and tire seating. If in doubt, consult a qualified technician or the manufacturer to confirm compatibility and safety.
Adapters and safety considerations
Adapters exist to allow cross-brand wheel fitting, but they come with safety and warranty implications. Poorly designed or improperly installed adapters can lead to vibration, wheel failure, or loss of control. Always use adapters from reputable manufacturers, have the installation performed by qualified technicians, and adhere to torque specs and maintenance schedules.
In addition, the use of non-OEM wheels or adapters may affect warranty coverage and may have legal or insurance considerations in certain jurisdictions. Confirm with your dealer or manufacturer before proceeding.
Conclusion and quick takeaways
Bottom line: Do not assume Can-Am and Honda share the same bolt pattern. There is no universal cross-brand compatibility for wheels between these brands. If you need cross-brand compatibility, expect to use adapters and confirm all mechanical tolerances. Always consult official manuals and professional installers to ensure safety and fit.
Summary
Can-Am and Honda generally do not share the same bolt pattern, and compatibility depends on the specific model-year. If cross-brand compatibility is essential, expect to use adapters and confirm all mechanical tolerances. Always verify with official manuals and professional installers to ensure safety and fit.
