Does Ford Bronco have a blind spot warning?

Yes. The Ford Bronco includes Blind Spot Information System (BLIS) with Cross-Traffic Alert as part of Ford's safety suite, commonly included via the Co-Pilot360 package across model years 2021 to present.

What BLIS is and how it works

The Bronco’s Blind Spot Information System (BLIS) uses sensors mounted in the rear corners of the vehicle to monitor vehicles in adjacent lanes. When a vehicle is detected in a blind spot, a warning is shown in the corresponding side mirror to alert the driver. Cross-Traffic Alert extends that warning to traffic approaching from the sides when backing up, helping you avoid collisions when reversing out of a parking space or driveway. BLIS is designed to assist, but it does not replace the driver’s responsibility to check mirrors and surroundings.

Availability by trim and year

Forecasting availability: In the Bronco lineup, BLIS with Cross-Traffic Alert is typically included as part of Ford’s Ford Co-Pilot360 Safety features. The exact inclusion can vary by trim year and optional packages, so it's best to verify on the window sticker or in the vehicle’s settings.

• BLIS with Cross-Traffic Alert is commonly included via the Co-Pilot360 Safety package on many Bronco trims.


• On some base configurations, BLIS may be optional or bundled with other Safety features.


• For used-broncos, always check the build sheet or listing to confirm BLIS is equipped.

When shopping or reviewing a Bronco, confirm BLIS is listed in the Safety or Driver Assist sections of the window sticker or owner’s manual, especially if you’re targeting a specific trim or year.

How to use BLIS in the Bronco

To make the most of BLIS, rely on the side-mirror indicators and any accompanying alerts. When a vehicle enters a blind spot, you’ll typically see a notification on the corresponding mirror and may hear an audible warning or see a message in the instrument cluster. Cross-Traffic Alert can warn you while backing out of a space if traffic approaches from the side. If you want to adjust or disable BLIS temporarily, you can usually find the option in the vehicle’s Driver Assist or Safety settings menu.

Alert types you might see

• Green indicator light in the left or right side mirror when a vehicle is detected in that blind spot.


• Audible chime or a warning message in the instrument cluster when a vehicle is in the blind spot or approaching from the side during backing up.


• Optional Cross-Traffic Alert alerts when reversing, including audible alerts and dashboard notifications.

Note that the presence and behavior of alerts can vary by model year and trim, so refer to your specific Bronco’s owner’s manual for exact details.

Limitations and tips

BLIS relies on radar sensors and system processing, which can be affected by weather, road conditions, or vehicle design. It may not detect every vehicle in all situations, and it may not perform optimally in heavy rain, snow, mud, or when objects are directly alongside the sensors. The system is intended as an assistive feature and should be used in conjunction with your own scanning and mirror checks.

• Keep the sensors clean and unobstructed; dirt, ice, or bike racks can degrade performance.


• Do not rely solely on BLIS in heavy traffic or complex driving environments.


• If BLIS warnings seem inconsistent, have the system inspected by a Ford dealer to verify proper operation.

Understanding these limitations will help you use BLIS effectively without over-reliance on technology.

Summary

In short, the Ford Bronco does offer a Blind Spot Information System with Cross-Traffic Alert as part of the brand’s safety package. Availability varies by model year and trim, so buyers should check the window sticker or vehicle settings to confirm BLIS is included. The system enhances awareness by alerting you to vehicles in your blind spots and traffic crossing behind you, but it does not replace careful driving and mirrors checks. Always consult the owner’s manual for exact operation and limitations specific to your Bronco.

Does Ford Bronco have blind spot monitoring?

Yes, the Ford Bronco and Bronco Sport have blind spot monitoring, though it is standard on some trims and available on others depending on the model year. The system is part of the {Ford Co-Pilot360 suite of safety features} and uses sensors to alert drivers with a warning light in the side mirror when another vehicle is in their blind spot. It also includes Cross-Traffic Alert, which warns of vehicles approaching from the sides when you are reversing. 
You can watch this video to see how the blind spot monitoring system works in a Ford Bronco: 1mAverage BroncoYouTube · Dec 30, 2021
Availability

• 2025 and 2024 models: Blind Spot Monitoring is a standard feature. 
• 2023 and earlier models: It may be available as part of a package or on higher trim levels. 

How it works

• Blind Spot Information System (BLIS): When a vehicle is detected in your blind spot, a warning light illuminates in the corresponding side mirror. 
• Lane change warning: If you activate your turn signal while a vehicle is in your blind spot, the light will flash to provide a more urgent alert. 
• Cross-Traffic Alert: When you are in reverse, this feature warns you of approaching vehicles from the sides and may apply the brakes. 

This video shows how to turn on the blind spot information system in a 2021 Ford Bronco Sport: 54sMarin AcuraYouTube · May 14, 2025

How do I turn on my Ford blind spot monitor?

To turn on Ford's blind spot detection (BLIS), use the steering wheel's "OK" or "OK" button to navigate to Settings, then Driver Assist, and finally select Blind Spot to toggle the system on or off. For a trailer, you may need to enter trailer information in the settings to enable BLIS with trailer coverage. 
This video shows how to turn on BLIS on a 2021 Ford Bronco Sport: 54sMarin AcuraYouTube · May 14, 2025
For a standard vehicle
This video demonstrates how to turn off BLIS on a Ford Edge: 1mQuiteAlrightYouTube · Nov 15, 2023

1. Navigate to Settings: Use the up/down arrows on the steering wheel to find "Settings" on the instrument panel. 
2. Select "Driver Assist": Press the "OK" button to enter the "Settings" menu, then scroll to and select "Driver Assist". 
3. Turn on Blind Spot: Select the "Blind Spot" option and choose "On". The system will automatically be on when your vehicle is in drive and above 5-6 mph. 

For a vehicle towing a trailer
You can watch this video to learn how to enable BLIS with trailer coverage: 1mFord Motor CompanyYouTube · Feb 12, 2017

1. Access Trailer Settings: Go to Settings > Driver Assist. You may need to select Towing or look for a specific "Trailer Blind Spot" option depending on your model.
2. Enter Trailer Information: Follow the on-screen prompts to select the type of trailer and enter its length.
3. Save the configuration: Save the information. This is required for BLIS to operate with trailer coverage. 

Why is no one buying Broncos?

And over the last couple of years there are certain models of the Broncos with dealer markups of $5,000 to $10,000. And some even reaching $20,000. Over MSRP. Which has now led to the Broncos.

What Ford package includes blind spot monitoring?

Ford BLIS® with Cross-Traffic Alert is an essential safety feature that helps prevent accidents by alerting you to vehicles in your blind spots. Part of the Ford Co-Pilot360® suite, the Ford F-150 BLIS® comes standard as your watchful companion whether you're heading to work or returning home after a long day.