How long is a 1982 Chevy c10?
The length of a 1982 Chevrolet C10 depends largely on the bed length. Short-bed models are typically about 208–210 inches long, while long-bed models run roughly 231 inches. Exact figures can vary slightly with cab style and factory options.
Overview of the 1982 C10 dimensions
In 1982, the Chevy C10 was part of the long-running C/K pickup lineup, available in regular or extended configurations with two bed options: a 6.5-foot short bed and an 8-foot long bed. These bed choices are the primary drivers of overall length, and subtle variations can occur due to trim, cab style, or drivetrain (2WD vs. 4x4).
Dimensions by bed configuration
Below are the typical overall lengths associated with the two most common bed configurations for the 1982 C10. These figures refer to standard regular-cab, Fleetside (straight) bed layouts commonly found on these trucks.
- Short bed (6.5 ft): approximately 208–210 inches in overall length (about 17 feet 4 inches to 17 feet 6 inches).
- Long bed (8 ft): approximately 231–232 inches in overall length (about 19 feet 3 inches to 19 feet 4 inches).
Note: These numbers are typical for standard two-wheel-drive regular-cab configurations. Variations can occur with four-wheel-drive models, Stepside beds, or unusual factory options.
How to verify your specific truck’s length
To determine the exact length of your particular 1982 C10, use the steps below. Each step helps confirm whether your truck uses the short or long bed, and thus its overall length.
- Identify the bed length by inspecting the bed: a 6.5-foot short bed or an 8-foot long bed is indicated by the exterior bed dimensions and the location of wheel wells.
- Check the wheelbase as a quick discriminator: short-bed C10s typically have a wheelbase around 117.5 inches, while long-bed models use a longer wheelbase near 131 inches.
- Measure the bumper-to-bumper length with a tape measure for an exact figure: place the zero at the front bumper and record the distance to the rear bumper.
- Consult factory documentation or the cab/bed combination on the driver’s door data plate or GM heritage literature for an exact spec for your VIN and build configuration.
These steps will help you confirm whether your truck aligns with the common short-bed or long-bed dimensions and provide an exact overall length for your specific vehicle.
Summary
For a 1982 Chevy C10, overall length is primarily determined by bed length. Short-bed versions are typically around 208–210 inches long, while long-bed versions sit near 231–232 inches. Variations may occur due to cab style, drivetrain (2WD vs. 4x4), and optional equipment. By identifying the bed length, checking wheelbase, and measuring bumper-to-bumper, you can determine the precise length of a given C10 from that era.
