How many quarts of oil does a 2016 Acura MDX take?
The 2016 Acura MDX takes 5.5 quarts of oil for a standard oil change. This includes the oil filter replacement as well.
Detailed Information on Oil Capacity for the 2016 Acura MDX
The 2016 Acura MDX is a midsize luxury SUV that requires regular oil changes to maintain optimal performance and engine health. According to the owner's manual and various automotive repair sources, the oil capacity for a 2016 Acura MDX is 5.5 quarts.
This oil capacity includes the oil filter, which should be replaced during each oil change. It's important to use the recommended oil type and viscosity specified by Acura for the 2016 MDX, which is typically 0W-20 synthetic oil.
Oil Change Procedure for the 2016 Acura MDX
- Locate the oil drain plug, usually located at the bottom of the oil pan
- Drain the old oil by removing the drain plug and allowing it to fully drain
- Replace the oil filter with a new one
- Pour in 5.5 quarts of the recommended 0W-20 synthetic oil
- Replace the drain plug and tighten it securely
- Start the engine and check for any leaks
- Reset the oil change indicator light or system
Following the proper oil change procedure and using the correct oil type and quantity is essential for maintaining the 2016 Acura MDX's engine health and performance. Consult your owner's manual or a certified Acura technician if you have any further questions.
Is it OK if I put 5w20 instead of 0w20?
If SAE 0W-20 synthetic oil is not available, SAE 5W-20 conventional oil may be used. However, it must be replaced with SAE 0W-20 synthetic oil at the next oil change.
What's the difference between 0W-20 and 5W-20?
Both 0W-20 and 5W-20 have similar viscosity at operating temps, with 0W-20 being slightly thinner. The lower viscosity of 0W-20 can provide better fuel economy compared to 5W-20 due to reduced friction and drag on the engine. 0W-20 oils require synthetic base oils and are not conventional oils.
How many quarts of oil does a 3.5 L V6 take?
6.0 qt
Capacities and Specifications - 3.5L Ecoboost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant | 13.1 qt (12.4 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear axle fluid (four-wheel drive) | 2.11 pt (1.0 L) |
What kind of oil does a 2016 Acura MDX take?
The type of oil recommended for the Acura MDX is 0W-20 or 5W-20 around Tustin. The first–0W-20–is a full synthetic oil and the second–5W-20–comes as a blend, which is a lower-priced option.
How much oil does a 3.5 l Acura MDX take?
5.1 quarts
What oil does a 2016 Acura MDX take?
The type of oil recommended for the Acura MDX is 0W-20 or 5W-20 around Tustin. The first–0W-20–is a full synthetic oil and the second–5W-20–comes as a blend, which is a lower-priced option.
How many quarts of oil in a 3.7 V6?
6.0 qt
Capacities and Specifications - 3.7L
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant | 11.7 qt (11.1 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear differential fluid (All Wheel Drive) | 2.4 pt (1.15L) |
Can I use 5W30 instead of 5W20 in my Acura MDX?
When sticking with manufacturer recommendation of very low viscosity grade of oils like this, ensure you stick with VERY TOP QUALITY FULL SYNTHETIC oils. Else, use 5W30 Synthetic especially if you drive under high speed and load. Nothing is wrong.
Which engine oil is best for an Acura MDX?
Acura recommends 5W20 viscosity. If you use a viscosity other than what's recommended in the owner's and service manuals, and you have a problem with your engine, they could blame it on the oil viscosity and refuse to honor the warranty for the repair.
How much oil does a 3.7 Acura MDX take?
4.5 quarts (with filter). After refill check oil level. Capacity: 4.2 quarts.
