How many quarts of oil does a Ford Edge hold?
The Ford Edge typically holds about 5.7 quarts of engine oil, with variations depending on the engine and model year. Always verify the exact capacity in the owner's manual or on the dipstick for your specific vehicle.
Over its production span, the Edge offered a couple of engine choices, and while oil capacity is broadly similar, exact numbers can shift slightly with different filters and specifications. This article outlines the common figures you’re likely to encounter.
Engine options and typical oil capacity
The following list covers the engines most commonly found in the Ford Edge in recent years and their typical oil capacity (including the oil filter).
- 2.0L EcoBoost I-4 — approximately 5.7 quarts of engine oil with filter.
- 3.5L V6 Ti-VCT — approximately 5.7 quarts of engine oil with filter.
Note: Some model years or regional specifications may show slight variations in capacity due to filter size or factory fill. Always confirm the exact figure in the owner's manual or by checking Ford’s official specifications for your VIN.
Practical guidance for checking and changing oil
When changing the oil, use the recommended viscosity (often 5W-20 for many Edges) and replace the filter. After adding oil, start the engine, run briefly to circulate, then recheck the level with the dipstick to ensure it’s within the proper range.
Summary
For most Ford Edge models, the engine oil capacity is about 5.7 quarts with the filter in place. Always verify the exact capacity for your specific model year and engine in the owner's manual or official Ford documentation, and use the correct oil filter when performing a change.
