How many quarts of transmission fluid does a 6.7 Cummins take?
The 6.7-liter Cummins diesel engine, commonly found in Dodge/Ram trucks, requires approximately 6 quarts of transmission fluid to fill the transmission. This fluid is essential for proper lubrication and operation of the transmission components.
Detailed Explanation
The 6.7 Cummins engine is a powerful and reliable diesel powerplant used in various Dodge/Ram heavy-duty pickup trucks. The transmission paired with this engine is a critical component that requires regular maintenance, including periodic fluid changes.
To fill the transmission of a vehicle equipped with a 6.7 Cummins engine, you will typically need around 6 quarts of transmission fluid. This fluid volume is necessary to ensure the proper lubrication and operation of the transmission's gears, bearings, and other internal components.
It's important to use the recommended transmission fluid specified by the vehicle manufacturer. For the 6.7 Cummins, the recommended fluid is typically a high-quality, heavy-duty automatic transmission fluid (ATF) that meets the performance requirements of the transmission.
Transmission Fluid Change Interval
In addition to the fluid capacity, it's crucial to follow the manufacturer's recommended transmission fluid change interval for the 6.7 Cummins. Typically, this interval is around 30,000 to 60,000 miles, depending on the vehicle's usage and operating conditions.
- Regularly changing the transmission fluid helps to maintain the fluid's lubricating properties and prevent wear on the transmission components.
- Neglecting to change the fluid at the recommended intervals can lead to increased wear, reduced performance, and even premature transmission failure.
- It's always best to consult the owner's manual or contact a qualified mechanic for the specific fluid change interval for your 6.7 Cummins-equipped vehicle.
Proper maintenance, including regular transmission fluid changes, is essential for ensuring the long-term reliability and performance of the 6.7 Cummins engine and its associated transmission.
How much transmission fluid does a 2018 6.7 Cummins hold?
Automatic Transmission Fluid
Capacity: 5.5 quarts Initial Fill. Capacity: 6 speed 68RFE RWD Total Fill 17.5 quarts.
How many quarts of transmission fluid do I need for a change?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
What transmission fluid for 6.7 Cummins?
Recommended: BLUE DIAMOND ATF+4/DEXRON III/MERCON V transmission fluid. 22.0 QTS. 120 Months or 150,000 mi./240 000 km.
How many quarts does a 6.7 Cummins transmission take?
Since it is a cummins it will have the 47RE transmission. If you are just doing a service (drain/fill replace filter) it will take 4.0 quarts. The total fluid capacity (including the torque converter) is 16.9 quarts.
How often do you change the transmission fluid in a Ram 2500 diesel?
Service automatic transmission every 60,000 or 30,000 miles under severe use, as specified in the RAM 2500 diesel maintenance schedule. Service front and rear axle fluids for intensive use every 60,000 or 30,000 miles.
How much transmission fluid does a 2008 6.7 Cummins hold?
Automatic Transmission Fluid
Capacity: 6 speed 68RFE RWD Total Fill 17.5 quarts.
How many quarts of ATF does a 68RFE take?
The fluid level will be approximately at the upper COLD hole of the dipstick at 21° C (70° F) fluid temperature. To avoid overfilling the trans, perform the following: • Remove the dipstick. Add approximately 10 quarts for stock pan or 14 quarts for deep pan. Apply the parking brake.
How many quarts of transmission fluid does a Ram 2500 take?
The diesel application has a total dry transmission fluid fill capacity of 17.5 quarts or 16.5 liters. However, due to the transmission design, only about 6.6 quarts will drain from the transmission when removing the transmission pan and changing the transmission filters.
How many quarts of transmission fluid capacity?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car's manufacture and other criteria.
How much transmission fluid does a 2007 Dodge Ram 2500 5.9 Cummins hold?
Automatic Transmission Fluid
Capacity: 5 speed 545RFE 4WD Total Fill 16.9 quarts. Capacity: 6.6 quarts Initial Fill.
