What is the torque on the 2024 Honda CRV Hybrid lug nuts?
The lug nuts on the 2024 Honda CR-V Hybrid should be torqued to 80 ft-lbs (108 Nm).
The 2024 CR-V Hybrid uses the standard lug-nut torque specification shared with other CR-V models in the same generation. Proper torque ensures even wheel seating, prevents loosening, and maintains overall safety. This article explains the official spec and how to apply it correctly when installing or reinstalling wheels.
Torque specification and its practical application
The official Honda CR-V service documentation specifies a lug-nut torque of 80 ft-lbs (108 Nm) for most configurations, including the Hybrid. Wheel sizes can vary by trim (commonly 18- or 19-inch wheels), but the torque value typically remains the same to ensure proper clamping force. If you have aftermarket wheels or non-standard hardware, always verify against your owner’s manual or the service manual.
To apply the torque accurately, follow these guidelines:
- Use a calibrated torque wrench with an 80 ft-lbs (108 Nm) setting or higher precision.
- Tighten in a star pattern to evenly seat the wheel and prevent rotor hub warping.
- Begin by hand-tightening the lug nuts to snug the wheel, then finish with the torque wrench to the specified value.
- Avoid lubricating lug studs or lug nuts unless the manual explicitly instructs you to; for most CR-V applications, dry tightening yields the correct clamping force.
- After installation, re-check the torque after a short drive (typically 50–100 miles / 80–160 km) to account for seating and settling.
Concluding: Adhering to the specified torque and tightening sequence helps ensure wheel safety, proper seating, and roadworthiness. Re-torquing after a break-in period is a standard practice for most vehicles, including the 2024 CR-V Hybrid.
Safety and maintenance notes
If you have aftermarket wheels, adapters, or non-standard lug nuts, always confirm torque values with the service manual. When in doubt, consult a qualified technician or your local Honda dealer to verify the correct specifications for your specific setup.
Additional considerations
Different trims or aftermarket configurations may occasionally require adjustments to the process, but the standard torque remains 80 ft-lbs (108 Nm) for the CR-V Hybrid in most cases. Always consult the owner’s manual or service manual for wheel-specific instructions and torque values.
Summary
Bottom line: The official lug-nut torque for the 2024 Honda CR-V Hybrid is 80 ft-lbs (108 Nm). Tighten in a star pattern, re-check after a short drive, and verify with the manual if you’re using aftermarket wheels or hardware.
