How much are brakes for Acura?
Prices for Acura brake parts and services vary widely depending on model, part type, and where you shop. In general, you’ll pay more for OEM parts than aftermarket equivalents, and larger or more technologically equipped models (like MDX or NSX) tend to be pricier than smaller sedans. Typical ranges below reflect common shop quotes and parts pricing as of 2025.
This article explains the factors behind brake pricing, outlines typical price ranges for pads, rotors, and complete brake jobs, and provides model-specific notes to help you estimate costs and shop for the best deal.
What affects brake prices on Acura vehicles
Several factors drive the cost of brakes on Acura cars and SUVs. Vehicle size and weight influence rotor size and caliper complexity; OEM (original equipment manufacturer) parts cost more than aftermarket equivalents; choosing ceramic or semi-metallic pads changes price; labor rates vary by region and shop; and whether you replace only the pads, only the rotors, or a full pads-and-rotors job all affect the final bill. Electronic braking aids, such as ABS and advanced stability systems, can also impact service time and cost.
Typical price ranges for Acura brake parts and service
Below are broad ranges you can expect for common brake services. The figures assume a typical shop or dealership in the United States and include parts and labor for one axle (either front or rear). Prices will vary by model, location, and whether you choose aftermarket or OEM parts.
- Aftermarket pads (installed per axle): 100–180 USD
- OEM Acura pads (installed per axle): 150–260 USD
Brake pads (Installed per axle)
Pad replacement is the most frequent brake service. If you’re replacing both front and rear pads at the same time, multiply accordingly for two axles.
Concluding: For a single axle, pad jobs typically run roughly from $100 up to about $260, depending on pad type and whether it’s front or rear.
- Aftermarket rotors (installed per rotor): 60–100 USD
- OEM Acura rotors (installed per rotor): 100–140 USD
Rotors (Installed per rotor)
Rotors add cost if you need them replaced alongside pads. Replacing two rotors on a single axle (front or rear) will double the rotor-related price, plus labor.
Concluding: Rotor replacements are typically in the range of roughly $120–$280 per axle for two rotors with aftermarket parts, and higher with OEM parts.
- Aftermarket pads + rotors (installed per axle): 250–450 USD
- OEM pads + rotors (installed per axle): 400–750 USD
Full brake service (pads + rotors, installed per axle)
Combining both components into a full pad-and-rotor job increases the total per axle. Expect higher quotes if you’re using OEM materials or upgrading to high-performance parts.
Model-specific notes
TLX
The TLX is a midsize sedan with balanced braking needs. Expect pad-only jobs to run roughly 120–220 USD per axle for aftermarket pads and 180–260 USD per axle for OEM pads. Rotor replacements follow the per-rotor ranges above, with front rotors typically more expensive than rears. A full front or rear axle pad+rotor job will generally sit in the 350–540 USD range for aftermarket parts and higher for OEM parts.
MDX
The MDX’s heavier, SUV-class braking hardware often pushes costs up a notch. Pad-only per axle (aftermarket) commonly fall around 130–190 USD, and OEM pads around 170–270 USD. Rotors (per rotor) are typically 70–110 USD aftermarket or 110–150 USD OEM. A full pad+rotor job per axle can range from about 320–520 USD (aftermarket) to roughly 480–780 USD (OEM).
RDX
RDX prices sit between TLX and MDX figures due to its smaller size. Pad-only per axle: aftermarket roughly 110–170 USD; OEM about 160–230 USD. Rotors per rotor: 70–110 USD aftermarket; 110–140 USD OEM. Full pad+rotor per axle: about 300–460 USD (aftermarket) or 420–700 USD (OEM).
ILX
As a compact model, the ILX generally costs less than larger Acura vehicles. Pad-only per axle (aftermarket) about 100–170 USD; OEM about 140–220 USD. Rotors per rotor: 60–90 USD aftermarket; 90–130 USD OEM. Full pad+rotor per axle: roughly 260–420 USD (aftermarket) or 360–660 USD (OEM).
NSX
The NSX uses high-performance braking systems, and many trims offer carbon-ceramic options. Brake service costs can be significantly higher than mass-market models. Pads and rotors for NSX can run well into the high hundreds per axle with aftermarket parts, and carbon-ceramic or specialty-option components can push quotes into the thousands. If you own an NSX or are considering service, contact a dealer or a specialty shop for an exact, model-specific estimate.
Tips to save money and get accurate quotes
To minimize surprises, shop around and compare quotes from at least three sources (dealerships, independent shops, and big-box auto parts retailers that offer installation). Ask for a written estimate that breaks out parts vs. labor and specifies whether OEM or aftermarket parts will be used. If your Acura is under warranty or a certified pre-owned program, verify whether brake service is covered and what parts are eligible for coverage.
Summary
Brake prices for Acura vehicles depend on model, part choice, and labor. General ranges indicate pads: roughly 100–260 USD per axle (OEM usually higher), rotors: about 60–140 USD per rotor, and a full pad+rotor job per axle roughly 250–750 USD depending on aftermarket vs OEM parts. Heavier models like the MDX or high-performance variants such as the NSX tend to cost more, with NSX potentially far above typical figures due to advanced materials or ceramic options. Always get a detailed estimate that separates parts and labor, and confirm whether OEM or aftermarket components are being used to compare true costs across shops.
How much are Acura brakes?
Acura Front Brake Pads Price
Typically the cost for parts will range from $100-$200 per axle and labor can cost anywhere between $80 - $100.
How much is a brake job for a Acura MDX?
The cost to replace the brake pads on an Acura MDX typically ranges from $150 to $300 per axle, which includes parts and labor. If the brake rotors also need to be replaced, the total cost could increase to $400 to $800 per axle or more. Prices vary depending on whether you use a dealership or an independent shop, the specific parts needed, and your location.
Factors that influence cost
- Parts: The price of brake pads can range from around $75 to $250 per axle, depending on the brand and type of pad.
- Labor: Labor costs typically fall between $80 and $100 per axle for a standard brake pad replacement.
- Shop type:
- Dealerships: These may have higher labor rates but use official manufacturer parts and offer manufacturer-backed warranties.
- Independent shops: May offer lower prices by using aftermarket parts, which are not official manufacturer parts but can still be of high quality.
- Additional repairs: The cost will increase if the brake rotors are damaged and need to be replaced in addition to the pads.
- Location: Prices can vary based on your geographic location and local labor rates.
Tips to save money
- Check for specials: Many dealerships, including Park Place Acura, run monthly specials on brake services that can help lower the overall cost.
- Consider aftermarket parts: Independent shops can use aftermarket parts, which may offer a more budget-friendly option compared to official OEM parts, while still providing reliable performance.
How much does a whole brake job cost?
A complete brake job can easily cost between $300 and $700 per axle. Why such a wide range? The final cost depends on a few key variables. This definitive guide will walk you through every factor, break down the costs, and help you understand how investing in quality parts can save you money in the long run.
How long do Acura brakes last?
30,000 to 70,000 miles
Depending on your driving style, Acura brake pads typically need to be replaced every 30,000 to 70,000 miles. That said, Acura brake service intervals can vary depending on what kind of driving you do. Take a moment to learn about the signs that your vehicle is in need of Acura brake service and more!
