How much does a Ford Ranger canopy weight?
A Ford Ranger canopy typically weighs between 60 and 150 kilograms (130–330 pounds), depending on the material and features. For a precise figure, always reference the exact canopy model and year from the manufacturer or retailer.
The weight of a Ranger canopy is not fixed. It varies primarily by material (fiberglass, aluminum, or composite/ABS) and by added features such as windows, roof racks, or heavy mounting hardware. This article outlines typical ranges and factors to help you estimate the load and plan installation.
Weight by Material
Material choice is the largest driver of canopy weight. The following ranges reflect common options seen in the market for Ford Ranger bed caps.
Material weight ranges
- Fiberglass canopy: commonly about 40–90 kg (90–200 lb).
- Aluminum canopy: typically around 25–60 kg (55–130 lb).
- ABS/composite canopy: generally about 30–70 kg (65–155 lb).
Conclusion: Material selection largely dictates weight. Heavier fiberglass units will increase the vehicle’s payload impact and handling, while aluminum and ABS options tend to be lighter and easier to install.
Other factors that affect weight
Beyond the base material, design choices and accessories can add substantial mass. The following factors frequently alter the total weight of a Ranger canopy.
Design and features
- Windows, vents, and skylights add weight compared with solid panels.
- Integrated roof racks, crossbars, and heavy mounting hardware increase mass.
- Locking mechanisms, insulation, and lighting fixtures add incremental weight.
- Rear hatch design (liftgate vs. swing doors) can influence overall weight distribution.
Conclusion: Extra features can significantly affect the total weight. If payload and handling are considerations, compare canopies with and without these options.
How to find the exact weight for your Ranger
To determine the precise weight for your setup, consult official specifications for your canopy model and year, and verify with the installer or retailer. If possible, obtain a shipping weight and an installed weight that includes mounting hardware.
Steps to verify exact weight
- Check the manufacturer or retailer’s product sheet for model-year compatibility and weight.
- Ask the seller for both shipping weight and installed weight with mounting hardware.
- When feasible, have the canopy weighed on a scale or at a shop to confirm its actual mass after hardware is added.
Conclusion: Exact weight varies by year, model, and options. Always confirm the specific configuration to avoid overloading the Ranger and to plan for installation and payload considerations.
Summary
In general, a Ford Ranger canopy sits in a broad range of about 60–150 kg (130–330 lb), with lighter aluminum or ABS units and heavier fiberglass versions. Material choice, plus features like windows, racks, and hardware, determine the final mass. For the most accurate number, obtain the exact specifications for your canopy model and year from the manufacturer or retailer.
How much do aluminum canopies weigh?
Engineered with Quality Materials for Strength
Marine grade aluminium (series 5,000) is the optimal material for Ute canopies. This material is lightweight and structurally robust. Our canopies typically weigh between 150-200kgs.
How much does the average canopy weigh?
But, our most typical canopy size of 20 foot length x 5 foot projection, on average weighs less than 300 lbs. , installed.
How much does a 10x10 canopy weigh?
51.3 pounds
Can you fit a 4x8 sheet of plywood in a Ford Ranger?
And the Tacoma. Even the TRD Pro has a 41 inch gap between the wheel wells. So it can't do it either uh to secure. It went with the hooks on the bed.
