How much does it cost to fix electric power steering in a 2010 Ford Fusion?
On a 2010 Ford Fusion, electric power steering (EPS) repair typically costs between about $800 and $2,000, depending on whether the issue is limited to the EPAS motor or requires replacing the entire steering rack, plus diagnostic and labor charges.
In this article, we break down the likely costs, the two main repair paths (motor-only vs. rack replacement), the variables that affect pricing, and practical tips to avoid surprises when the EPS light comes on in an older Fusion.
Understanding the EPS issue in the 2010 Fusion
Electric power steering in this model is managed by an EPAS unit mounted on the steering rack. When the unit fails or a sensor or control module detects a fault, the steering may feel heavy or inconsistent and a warning light can illuminate. A professional diagnostic is typically required to determine whether the EPAS motor, the steering rack, or a related sensor is at fault. Costs vary with the fault's location and whether the part is replaced with new or remanufactured components.
Cost breakdown by repair path
Motor-only replacement (EPAS motor)
Replacing just the EPAS motor is typically the less expensive repair path, but access and compatibility with the rack can influence the final price.
- Diagnostic/inspection and fault-code reading: $0–$150 (often waived if you proceed with the repair).
- EPAS motor replacement (parts): roughly $350–$800.
- Labor for motor replacement: roughly $150–$450.
- Estimated total (parts + labor): commonly $500–$1,250.
Conclusion: If the motor is faulty and the rack is still sound, motor replacement can be a more affordable fix, but a thorough diagnostic is essential to confirm the root cause.
Rack replacement (complete EPAS assembly)
When the entire EPAS-equipped steering rack must be replaced, the cost is significantly higher but may be necessary if the rack is damaged or if multiple components have failed.
- Diagnostic/inspection and fault-code reading: $0–$150.
- Rack assembly (EPAS-equipped rack): roughly $800–$1,600 for parts.
- Labor for rack replacement: roughly $300–$900.
- Estimated total (parts + labor): commonly $1,100–$2,500.
Conclusion: Rack replacement represents the more expensive route and may require calibration or reprogramming of the EPS system to restore full responsiveness.
Other costs to consider after EPS repair
In addition to the core repair, you may face ancillary expenses to ensure proper operation and safety after the fix.
- Wheel alignment after steering work: $75–$150.
- Software updates or reprogramming (dealer vs. independent shop): $50–$200.
- Warranty and service plans: many shops offer 1–3 year warranties on remanufactured motors or racks; verify coverage before purchase.
Conclusion: Budget for a wheel alignment and potential software updates when completing an EPS repair to avoid future steering issues.
Tips to save money and choose wisely
To minimize costs and avoid rework, consider these practical steps before authorizing a repair.
- Shop around for multiple quotes (dealer vs. independent shops) and compare warranties.
- Ask about remanufactured or refurbished EPAS motors or racks, which can be cheaper while still offering a warranty.
- Clarify whether diagnostic fees are waived if you proceed with the repair.
- Check for recalls or extended warranties related to EPS or power steering for your vehicle's VIN.
Conclusion: Doing homework on parts options, warranties, and service charges can save hundreds of dollars and reduce the risk of future EPS issues.
Summary
For a 2010 Ford Fusion, fixing electric power steering typically costs between roughly $800 and $2,000, depending on whether you replace only the EPAS motor or the entire steering rack, plus diagnostic and labor. Motor-only repairs are generally cheaper, while rack replacements are the higher-cost path. Always obtain multiple quotes, verify warranty coverage on remanufactured parts, and plan for ancillary costs like alignment and possible software updates. A careful, informed approach helps navigate EPS issues efficiently and avoid unexpected expenses.
How much is power steering for a 2010 Ford Fusion?
The range of prices of Power Steering Pumps for the 2010 Ford Fusion goes from $107.99 up to $328.99 for the most premium parts.
Can you still drive if electric power steering goes out?
Yes, it's possible to drive without power steering. However, power steering failure in an electric or hydraulic power steering system can make normal steering challenging and risky. Driving through traffic, making low-speed turns, and parking may require more steering effort.
How to reset the electric power steering in a Ford Fusion?
And wait 5 seconds. And return the steering wheel to. Center. Turn off the car. Turn it back on. And test to see that your power steering feels much more fluid.
How expensive is it to fix electric power steering?
Electric power steering repair costs vary significantly depending on the specific issue, with minor fixes potentially costing $100–$300, while replacing major components like the EPS motor or full steering column can range from $300 to $1,550 or more. Factors like vehicle make and model, the specific part that needs replacement, and labor rates all influence the final price.
This video explains the cost of electric power steering repair and the factors that influence it: 1mTalkingTechTrendsYouTube · Jun 7, 2025
Cost breakdown by repair type
- Minor fixes: Simple issues like a sensor or small leak can sometimes be fixed for $100–$300.
- EPS Motor: If the electronic motor fails, replacement costs typically range from $300 to $800.
- Full Steering Column: Replacing the entire steering column is one of the more expensive repairs, with costs often falling between $530 and $1,550.
- Steering Rack: Replacing the steering rack can cost between $710 and $2,420 for most vehicles.
- Diagnostic Fees: Some shops charge a diagnostic fee, which can be around $200, to determine the exact problem.
Factors that affect the cost
- Vehicle Make and Model: The cost of parts varies significantly based on the vehicle. For example, dealer parts can be more expensive than aftermarket ones.
- Labor Costs: Labor can account for a significant portion of the total cost, especially for complex repairs like a steering column or rack replacement.
- Shop Location: Labor rates vary by geographic location, so getting quotes from different shops can be beneficial.
- Part vs. Labor: In many cases, labor costs can be higher than the price of the part itself.
- DIY vs. Professional: If you have the mechanical skill, doing the work yourself can save significant money on labor. However, professional help is recommended for more complex issues, and some repairs require specialized equipment or programming.
