How much horsepower does a Dodge A100 have?
Stock Dodge A100s offer a range of horsepower, roughly 90 to 200 hp depending on the engine and year.
The A100 was built from the mid-1960s into the early 1970s with several engine options. Horsepower varied by model year and configuration, from small inline-sixes to a rare V8, making exact figures highly dependent on the specific vehicle. This article breaks down the typical power outputs you might encounter across the A100’s production span and what to look for when evaluating a particular van.
Engine options through the years
1964–1966: early A100 engines
Before listing engine options, note that early A100s used smaller inline-sixes and, less commonly, a small V8. The horsepower figures below reflect typical stock configurations for these years.
- 170 cu in inline-six: approximately 90–110 horsepower (gross).
- 198 cu in inline-six: approximately 125–140 horsepower (gross).
- 225 cu in slant-six: approximately 145–170 horsepower (gross).
- 273 cu in V8 (rare): approximately 180–200 horsepower (gross).
End of era caveat: horsepower figures for these engines depend on carburetion, exhaust, and gearing, and many surviving A100s have been modified from stock specifications.
1967–1970: later A100 engines
In the later years, the 225-slant six became the standard six-cylinder option for many A100s, with output in the same ballpark as earlier 225 engines. V8 options remained rare but available in some configurations.
- 225 cu in slant-six: approximately 145–170 horsepower (gross).
- 273 cu in V8: approximately 180–200 horsepower (gross).
Note: even within the same engine family, horsepower varied with carburetor setup, exhaust, and emissions equipment used in late-1960s models.
Notes on horsepower measurements
Horsepower figures from the era are commonly “gross” ratings, measured under laboratory conditions, and they tend to be higher than the “net” ratings used after the 1970s. When comparing numbers from period brochures to modern restorations or ads, it’s important to confirm whether the figure is gross or net and to account for any modifications that may affect output.
What this means for A100 buyers and collectors
For most collectors today, the 225 cubic inch slant-six is the most common and practical powerplant, offering solid torque for a vintage van. If you’re evaluating an A100 for purchase or restoration, identify the exact engine code, check if the rating is gross or net, and consider how modifications or emissions equipment could affect real-world performance.
In short, the Dodge A100’s horsepower is not a single number but a spectrum tied to engine choice and condition, spanning roughly 90–200 hp in stock configurations over its production run.
Summary
The Dodge A100’s horsepower varies widely by engine and year, with early inline-sixes offering roughly 90–140 hp, the 225 slant-six typically delivering 145–170 hp, and rare V8-equipped versions pushing toward 180–200 hp. When assessing a specific A100, confirm the exact engine, rating type (gross vs net), and the vehicle’s condition to gauge expected performance.
What Dodge has 1000 HP?
The 2023 Dodge Challenger SRT Demon 170 is a factory-built 1,000-plus horsepower Dodge, while Hennessey Performance offers a 1,000-horsepower "H1000" upgrade for various Dodge Challenger and Charger models. There is also a Hennessey MAMMOTH 1000 Ram TRX, which is a truck with 1,000 horsepower.
Factory-built
- 2023 Dodge Challenger SRT Demon 170: This limited-production Dodge model has a 6.2L supercharged V8 engine that produces 1,025 horsepower on E85 fuel.
Hennessey Performance upgrades
- H1000 Dodge Challenger/Charger: Hennessey provides an upgrade package called the "H1000" for various Challenger and Charger Hellcat models, boosting them to 1,000 horsepower and 948 lb-ft of torque. This includes modifications like a larger supercharger and high-flow fuel injectors.
- MAMMOTH 1000 Ram TRX: Hennessey also offers a 1,000-horsepower upgrade for the Ram TRX truck, which is built by Dodge's parent company.
What engine did the Dodge A100 have?
| Dodge A100 | |
|---|---|
| Engine | 170 cu in (2.8 L) Slant-6 I6 225 cu in (3.7 L) Slant-6 I6 273 cu in (4.5 L) LA V8 318 cu in (5.2 L) LA V8 |
| Transmission | 3-speed manual 3-speed automatic |
| Dimensions | |
| Wheelbase | SWB: 90.0 in (2,286 mm) LWB: 108.0 in (2,743 mm) |
What is the top speed of the Dodge A100?
MMP Rating
| Engine Specifications | |
|---|---|
| Top Speed: | 100 - 110 mph (estimated) |
| Transmission and Drive | |
| Drive Type: | Rear-wheel drive |
| Transmission Type: | 3-speed manual, 3-speed automatic |
How much is a 1970 Dodge D100 worth?
Typically, you can expect to pay around $15,267 for a 1970 Dodge D100 1/2 Ton in good condition with average spec. What is the highest selling price of a 1970 Dodge D100 1/2 Ton? The highest selling price of a 1970 Dodge D100 1/2 Ton at auction over the last three years was $66,000.
