What size socket for Ford F150 lug nuts?
For most Ford F-150 lug nuts, use a 13/16-inch socket. This is the standard hex size used by the majority of factory lug nuts on F-series trucks. However, sizes can vary by year, trim, wheel style, and aftermarket rims, so it’s important to verify for your specific vehicle before attempting a tire change.
In this article, we break down the typical socket size, why variations exist, and how you can confirm the exact size for your Ford F-150. The goal is to help you avoid stripping nuts or wasting time at the shop.
Common socket size for Ford F-150 lug nuts
Below is the most frequently encountered size for F-150 lug nuts. Use this as a starting point when you work on standard factory wheels.
- 13/16 inch (20.6 mm) hex socket is standard for the majority of factory lug nuts on Ford F-150s.
While 13/16 inch is the norm, variations can occur depending on wheel specifications and aftermarket components. Always verify to prevent damage to the lug nuts or wheels.
How to verify your exact lug nut size
To ensure you have the correct socket for your particular F-150, follow these verification steps before you loosen anything on the wheel.
- Check the owner’s manual or the wheel/wheel-nut specification sheet provided with your tires or wheels.
- Look at the lug nut itself for any stamped size information on the hex flats (note: this is not always present).
- Measure the distance across the opposite flat sides of a lug nut with a caliper or ruler to determine the hex size in inches or millimeters.
- If you have aftermarket wheels, consult the wheel manufacturer or your dealer to confirm the correct lug nut size and seat type.
Verification is especially important if you run aftermarket wheels or specialty trims, as some combinations use different lug-nut sizes or seat styles. When in doubt, seek a quick confirmation from a professional.
When to seek professional help
If you’re unsure about the lug nut size or you encounter tightness, corrosion, or damaged hardware, contact a dealership or a qualified mechanic to avoid stripping nuts or damaging wheels.
Summary
The typical lug nut socket size for Ford F-150s is 13/16 inch hex, which covers the majority of factory wheels. However, variations exist, especially with aftermarket wheels or certain trims. Always verify using your owner’s manual, wheel documentation, or a professional if you’re unsure. Taking a moment to confirm can prevent damage and save time during maintenance.
What size are the lug nuts on a 2018 Ford F150?
14x1. 5 Lug Nuts For Ford F150 2015-2024,Solid One Piece Design Fits F-ord Expedition F-150 Lincoln Navigator on FORD OEM Aluminum Wheels,OE Replacement For ACPZ-1012-B Through-Hardened Steel NOT Swell.
Is 7/8 socket the same as 22mm?
A: 22mm = 0.866", which essentialy is a 7/8" socket. A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
What size are the lug nuts on a 2015 Ford F150?
M14x1. 5 Lug Nuts - Replacement for 2015-2024 Ford F150, Expedition, 2015-2020 Lincoln Navigator 24PCS OEM Factory Chrome 21mm Hex, One-Piece Solid Anti-Rust Wheel Lug Nuts.
Is a 13/16 socket the same as 21mm?
13/16" or 21mm is a common interchangeable size for wheel bolts / lug nuts and spark plugs on older cars. I prefer to use 13/16" if I can as it fits tighter. 5-sided is also for bolts used on utility or manhole covers. 5 sided is most likely for a water valve or gas valve in a residential setting.
