How much is a brake job on a Honda Accord?
Generally, a full brake job on a Honda Accord runs about $600–$1,100 for both axles; a single-axle service is usually around $300–$550, depending on parts and labor in your area.
Brake service costs vary based on the model year, trim, and the condition of the rotors and calipers. This article breaks down what a brake job typically includes, the typical price ranges you can expect, and the factors that influence the final bill. It also offers questions you can bring to a shop to ensure you get an accurate, itemized quote.
What a brake job typically includes
The following components and steps are commonly part of a standard brake service. The exact scope depends on rotor wear, pad material choices, and whether any hardware or fluid maintenance is needed.
- Replacement of brake pads (front, rear, or both axles)
- Rotor resurfacing or replacement if wear is excessive or warping is detected
- Inspection of calipers, slides, and hardware; lubrication and new anti-squeal shims as needed
- Brake fluid check and potential flush if recommended by the shop
Most shops provide a diagnostic check to confirm that there are no leaks, and to verify that the ABS and warning lights behave normally after the service.
Cost ranges and scenarios
Prices vary by axle and by whether rotors are replaced or resurfaced, as well as by the pad material chosen. The ranges below reflect typical U.S. prices, including parts and labor, as of 2024–2025. Always request an itemized quote to compare what you’re actually paying for.
- Front brakes (pads only, one axle): 150–300
- Front brakes (pads + rotors, one axle): 300–550
- Rear brakes (pads only, one axle): 100–200
- Rear brakes (pads + rotors, one axle): 200–350
- Full front and rear brakes (pads and rotors on both axles): 600–1,100
Prices can be higher at dealerships or in high-cost metropolitan areas, and lower at independent shops or in regions with lower labor rates. If rotors are still usable but pads are worn, expect the lower end of the range; if rotors require replacement due to scoring or warping, the cost will be toward the higher end.
Factors that influence the final price
Several variables can tilt the total cost up or down. Understanding these can help you budget and negotiate a fair quote.
- Geographic location and shop type (dealership vs independent)
- Pad material choice (ceramic, semi-metallic, or organic pads)
- Rotor condition and whether resurfacing is possible or rotor replacement is required
- Whether additional services are needed (brake fluid flush, hardware replacement, or caliper repair)
- Vehicle model year and hardware compatibility
- Taxes, shop fees, and any warranties offered
To avoid surprises, ask for an itemized estimate that breaks down parts, labor, and any fees. Also inquire about pad and rotor warranties and whether resurfacing is included in the price.
What to ask your technician
Before agreeing to service, use these questions to ensure you understand the scope and value of the brake work.
- What exactly is included in the quoted price (pads, rotors, hardware, fluid, labor hours)?
- What materials are being used and what warranties apply?
- Is rotor resurfacing an option, or are rotor replacements necessary?
- Are there any recommended optional services (like a brake fluid flush or caliper lubrication) and their costs?
Getting multiple quotes and asking for a vehicle-specific inspection can help you compare apples-to-apples and avoid unnecessary work.
Summary
For most Honda Accords, plan on roughly $600–$1,100 for a full front-and-rear brake job, with single-axle service typically in the $300–$550 range. Costs vary with rotor condition, pad material, and local labor rates. Always seek an itemized estimate, confirm what is included, and consider warranties when choosing where to have the work done. Regular brake inspections can help prevent surprises and keep your vehicle safely on the road.
How much does it cost to replace brakes on a Honda Accord?
Depending on your Accord year and type of brake pad you want, it can cost somewhere between $150 - $450 per axle to replace your Honda Accord's brake pads.
What is a fair price for a brake job?
A fair price for a brake job is typically $300 to $600 for one axle (either front or rear pads and rotors) and $600 to $1,200 or more for all four brakes. The total cost depends on your vehicle's make and model, the quality of parts used, and whether only pads or pads and rotors are being replaced.
Factors that influence the cost
- Parts: The price of parts like brake pads, rotors, and calipers varies by brand and quality.
- Vehicle type: Luxury, trucks, or performance cars often cost more due to higher-end parts and more complex systems.
- Labor: Labor costs vary based on the shop's rates and the complexity of the job. More complex tasks, like replacing rotors, take more time and increase the labor cost.
- Additional services: Some repairs may require additional parts or services, such as brake fluid replacement or caliper repair, which will increase the final price.
How to get a fair price
- Get multiple quotes: Contact a few different shops for estimates to compare prices and services.
- Ask about parts: Be sure to ask what kind of parts are being used and if there are different quality options. Using OEM or premium aftermarket parts can impact the cost.
- Consider the scope of work: Make sure you know what's included in the quote. Some repairs may only need brake pads, while others may need rotors, or even calipers, which will affect the price.
- Check online reviews: Look up reviews of the shops you're considering to ensure you'll be getting quality service.
How much is a brake job on a 2016 Honda Accord?
The average cost for a Honda Accord Brake Pad Replacement is between $278 and $336. Labor costs are estimated between $124 and $182 while parts are typically priced around $154.
How much does Honda charge for a brake job?
The brake repair cost estimate can vary depending on your vehicle. On average, a brake pad replacement will cost $150 per axle. However, this price range is between $100 to $300 per axle.
