How much is a motor mount for a Honda Fit?
A motor mount for a Honda Fit typically costs between about 60 and 260 USD for the part, with installation bringing the total to roughly 200 to 700 USD depending on the mount type and labor rates.
The Honda Fit uses several engine and transmission mounts across its generations, including front engine mounts, rear torque mounts, and transmission mounts. The exact part needed depends on your model year, engine type, and whether the mount is hydraulic or rubber; OEM parts cost more but are a closer factory match, while aftermarket options can save money but vary in quality.
OEM vs aftermarket options
Prices differ by brand and source; the following breakdown covers common choices.
OEM vs aftermarket
- OEM engine mount (front/left) for Honda Fit: typically about 120–240 USD.
- OEM rear torque mount: typically about 140–260 USD.
- Aftermarket engine mounts (brands like Dorman, DEA, Febi, etc.): typically 40–120 USD per mount.
- OEM transmission mount: typically 90–180 USD.
- Aftermarket transmission mount: typically 50–150 USD.
- Hydraulic vs rubber mounts: hydraulic versions tend to be pricier (roughly 100–260 USD aftermarket vs 150–300 USD OEM for some designs).
When shopping, confirm the exact part number for your Fit’s engine and generation, since prices vary by mounting position and design.
Typical price ranges by mount type
Before looking for a price, note that the part you need (engine mount, torque mount, or transmission mount) and whether it’s hydraulic or rubber will significantly influence cost.
- Engine mount (front/left) – OEM: 120–240 USD; aftermarket: 40–120 USD.
- Rear torque mount – OEM: 140–260 USD; aftermarket: 50–140 USD.
- Transmission mount – OEM: 90–180 USD; aftermarket: 50–150 USD.
- Hydraulic variants vs rubber – hydraulic OEM 150–300 USD; aftermarket 70–160 USD.
Prices vary by region, generation, and exact part design, so check the specific part number for your Honda Fit model year to get an exact figure and availability.
Labor considerations
In addition to the part price, labor costs can add significantly to the total. Expect roughly 1 to 3 hours of labor at typical shop rates of about 75–150 USD per hour, depending on the vehicle, shop, and whether access is complicated by other components. Some DIYers may save on labor by replacing a single mount themselves, though mounting work can be a multi-step job that benefits from a lift or ramp access.
Summary
Motor mounts for the Honda Fit show a wide price range driven by mount type, brand (OEM vs aftermarket), and whether the unit is hydraulic or rubber. Engine mounts tend to be the priciest among the common options, with transmission and torque mounts generally cheaper. Always verify the exact part number for your year and engine to ensure proper fit, and factor in labor costs when budgeting for replacement.
What is the most common problem with Honda Fit?
Top Honda Fit Problems
- Honda Fit radio and remote key entry not working after jump start.
- Honda Fit interior dust accumulation issue.
- Honda Fit front lights are too dull for safe night driving.
- Honda Fit windshield damage with multiple chips and divets repaired using a kit.
How much does it cost to replace a motor mount on a Honda Fit?
The average cost for a Honda Fit Engine Mount Replacement is between $509 and $568. Labor costs are estimated between $127 and $186 while parts are typically priced around $382. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
Is it worth replacing a motor mount?
Because it can lead to further damage and safety risks, you should fix a bad motor mount before continuing to drive. What's the typical cost of motor mount replacement? The typical cost can range from $150 to $500, depending on the make and model of your vehicle and labor costs.
Can I drive with bad motor mounts?
You can drive a short distance with bad motor mounts, but it is not recommended as it can lead to further damage and safety concerns. Driving with bad mounts causes increased vibrations and can eventually lead to engine parts shifting and damaging other components, such as hoses or wiring. It's best to address the issue as soon as possible to prevent more costly repairs and potential hazards, such as the engine becoming dislodged.
This video explains the potential dangers of driving with bad motor mounts: 57sAuto Repair GuysYouTube · May 18, 2021
Risks of driving with bad motor mounts
- Increased vibration: You will likely notice a significant increase in vibrations and noise, especially when accelerating.
- Further damage: The other mounts will have to work harder, leading to faster wear and tear on them. The engine's excessive movement can also cause other parts like hoses, wires, or the exhaust system to be stressed or damaged.
- Loss of control: In severe cases, the engine can shift enough to interfere with or damage critical systems, potentially affecting your ability to steer, brake, or accelerate, which is a major safety risk.
- Catastrophic failure: If left unaddressed for too long, a complete mount failure could occur, causing the engine to drop further and potentially leading to a major accident.
What you should do
- Drive minimally: If you must drive, do so gently and avoid hard acceleration or braking. Avoid long trips until the mounts are repaired.
- Get it inspected: Visit a mechanic as soon as you can for a professional diagnosis. They can assess the severity and recommend the best course of action.
- Replace all mounts: It is often recommended to replace all of the motor mounts at the same time, as they often wear out at a similar rate.
