How much oil does a 2007 Ford Ranger rear diff hold?
The 2007 Ford Ranger rear differential typically holds between 3.5 to 4 pints (1.65 to 1.89 liters) of gear oil. This is the standard capacity for the rear differential in this model year of the Ford Ranger compact pickup truck.
Detailed Answer
The 2007 Ford Ranger is a compact pickup truck that was produced by Ford Motor Company. The rear differential, also known as the rear diff or rear end, is a crucial component that transfers power from the transmission to the rear wheels. The rear differential in the 2007 Ranger is responsible for distributing the appropriate amount of torque to each rear wheel, enabling the vehicle to turn corners and navigate different terrain effectively.
According to the information gathered from various automotive resources, the standard capacity for the rear differential in a 2007 Ford Ranger is between 3.5 to 4 pints (1.65 to 1.89 liters) of gear oil. This gear oil, also referred to as differential fluid, is responsible for lubricating the gears and bearings within the rear differential, ensuring smooth and efficient power transfer to the rear wheels.
It's important to note that the exact capacity may vary slightly depending on the specific model, options, and any modifications made to the vehicle. Therefore, it's always recommended to refer to the owner's manual or consult with a professional mechanic to determine the exact fluid capacity for a particular 2007 Ford Ranger.
Maintaining the Rear Differential
Proper maintenance of the rear differential is crucial for the longevity and performance of the 2007 Ford Ranger. Here are some key tips for maintaining the rear differential:
- Check the gear oil level regularly and top it up if necessary, using the recommended type and quantity of fluid.
- Replace the gear oil at the intervals specified in the owner's manual, typically every 30,000 to 60,000 miles (48,000 to 96,000 km).
- Inspect the rear differential for any signs of leaks or damage, and address any issues promptly to prevent further problems.
- Avoid overloading the vehicle or towing heavy loads, as this can put additional strain on the rear differential and increase the risk of premature wear or failure.
By following these maintenance guidelines, you can help ensure the long-term reliability and performance of the rear differential in your 2007 Ford Ranger.
Can you use 75W140 instead of 75w90?
You can use 75W-140 instead of 75W-90, but only if your vehicle's manufacturer specifically recommends the heavier oil, such as for towing or heavy-duty use. If your manufacturer recommends 75W-90, using 75W-140 can increase friction, decrease fuel efficiency, and make shifting more difficult because it is thicker at operating temperatures.
Key differences
- Cold viscosity: Both oils have the same viscosity rating in cold temperatures, so both will provide similar cold-start protection.
- Hot viscosity: 75W-140 is significantly thicker than 75W-90 at high operating temperatures.
When to use 75W-140
- If your vehicle is designed for it, such as for heavy-duty trucks or specific high-performance applications.
- If you frequently tow heavy loads or drive in very hot conditions where extra protection is beneficial.
When to stick with 75W-90
- Always follow your vehicle manufacturer's recommendation, as using a thicker oil can cause issues.
- Consequences of using the wrong oil: Using 75W-140 in a system designed for 75W-90 can lead to increased friction, reduced efficiency, and potential overheating.
- It may also make shifting more difficult.
How much oil does a 2007 Ford Ranger take?
The 2007 Ford Ranger oil capacity depends on the engine size: the 2.3L 4-cylinder requires 4 quarts, while both the 3.0L and 4.0L V6 engines need 5 quarts when changing the oil with a new filter. It's crucial to check your owner's manual to confirm the exact capacity and recommended oil viscosity for your specific vehicle.
| Engine Size | Oil Capacity (with filter) |
|---|---|
| 2.3L 4-cylinder | 4 quarts |
| 3.0L V6 | 5 quarts |
| 4.0L V6 | 5 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_6colaZKaIM2pi-gPz7bgqQg_194';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
What kind of rear diff fluid does a 2008 Ford Ranger take?
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No. 889785) We've squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions.
How much fluid does a Ford Ranger rear diff hold?
The Ford Scheduled Maintenance is "Every 150,000 mi (240,000 km) Change the rear axle fluid." The rear axle fluid capacity specifications are 3.70pt (1.75L) or (1.85 quarts) for a standard axle ; 3.04pt (1.44L) or (1.52 quarts) for a locking axle.
