How much oil does a 2008 Land Cruiser v6 take?
The quick answer is that the 2008 Land Cruiser most commonly uses a 5.7-liter V8 and requires about 7.9 quarts (7.5 liters) of engine oil with the filter. There is no V6 version of the 2008 LC in the U.S. market; if you’re looking at a regional variant such as Prado that uses a V6, capacities differ from the U.S. LC.
In detail, the 2008 Land Cruiser sold in many markets is equipped with a 5.7-liter V8. Oil capacity can vary slightly depending on the oil filter and drain plug configuration, but the standard total oil capacity with a filter is about 7.9 quarts (7.5 liters). For vehicles outside the U.S. that employ a 4.0-liter V6 in related models (e.g., Prado variants), the oil capacity typically falls in a lower range, around 6.0–6.5 quarts (approximately 5.7–6.2 liters). Always verify with the owner’s manual or the vehicle’s dipstick to ensure accuracy for your exact build and regional specifications.
Engine configurations and corresponding oil capacities
To help distinguish between the common configurations people encounter, here are the typical figures for the engines associated with the 2008 Land Cruiser family. Note that exact capacity can vary slightly with filter size and oil pan design.
- 5.7L V8 (US-market 2008 Land Cruiser): approximately 7.9 quarts (7.5 liters) of engine oil with the filter.
- 4.0L V6 variants in related models (e.g., Prado-style configurations in some regions): approximately 6.0–6.5 quarts (about 5.7–6.2 liters) with the filter.
The key takeaway is that the “V6” label does not apply to the U.S. 2008 Land Cruiser; the widely sold version uses the 5.7L V8 and its oil capacity is ~7.9 quarts with filter. If you own a regional variant with a V6, confirm the exact figure from your manual or dealer because it can vary by market and model year.
Oil grade and maintenance recommendations
For most 2008 Toyota Land Cruisers with the 5.7L V8, Toyota commonly recommends 5W-30 engine oil as the standard grade, suitable for a broad temperature range. If you use conventional oil, follow the factory-recommended change interval (often around every 5,000 miles in severe service) or extend to 7,500–10,000 miles when using synthetic oil and under favorable driving conditions. Always consult the owner’s manual for the exact specification and interval based on climate and driving conditions.
Practical tips for changing the oil
When performing an oil change, ensure you have the correct filter and the right fill amount. After draining, add oil gradually and recheck with the dipstick to reach the recommended level. If you’re switching oil brands or viscosities, monitor engine performance and oil pressure, and consider a full oil flush only if recommended by Toyota or a qualified technician.
Summary
In summary, the 2008 Land Cruiser sold in the United States uses a 5.7-liter V8 and takes about 7.9 quarts (7.5 liters) of engine oil with the filter. There are regional variants of the Land Cruiser family, such as Prado-based models, that use a 4.0-liter V6 with a different, typically lower, oil capacity. Always verify the exact figure for your vehicle from the owner's manual or a Toyota dealer, and follow the recommended oil grade and maintenance intervals for optimal performance.
How much oil does a Land Cruiser V6 take?
The 2025 Toyota Land CruiserBahrain Toyota Land CruiserEgypt Toyota Land CruiserKuwait Toyota Land CruiserOman Toyota Land CruiserQatar Toyota Land CruiserUAE Toyota Land CruiserKSA Toyota Land Cruiser V6 requires a total of 7.5 liters (7.9 quarts) of engine oil.
How much oil does a 3.5 L V6 Toyota engine take?
6.1 quarts
3.5L V6 Engine: 6.1 quarts with filter. 2.5L Hybrid Engine: 4.5 quarts with filter.
How many quarts of oil does a 3.6 L V6 take?
A 3.6L V6 engine typically takes between 5 and 6 quarts of oil, but the exact amount varies by vehicle model, so you must check your owner's manual or the oil fill cap for the precise capacity. For example, some models like a 2013 Jeep JK require 6 quarts, while newer models like a 2020 Jeep Wrangler or 2018+ Jeep Wrangler JL may only take 5 quarts.
Here are some general guidelines:
- Check your owner's manual: This is the most reliable source for your specific vehicle.
- Look at the oil fill cap: It may have the required viscosity and capacity printed on it.
- Consider the model year: Newer vehicles, especially certain Jeep models, have different oil capacities than older ones.
- Change the oil filter: Always include an oil filter change, as this is part of the full oil capacity.
- After refilling, check the level: After you've filled the engine with oil, use the dipstick to check the oil level and add more if needed to reach the "full" line.
How much oil does a 2008 Toyota Land Cruiser take?
7.4 quarts
Engine Oil
Capacity: 7.4 quarts (with filter). After refill check oil level.
