How much oil does a 2017 Ford Transit take?
For most 2017 Transit models with gasoline engines, the engine oil capacity is around 6 quarts with a filter. The diesel-powered 3.2L PowerStroke variant requires about 12 quarts. Always verify the exact figure for your specific engine and configuration using the owner's manual or a Ford dealer.
Engine options and oil capacity
Gasoline engines
Gasoline variants in the 2017 Transit share a similar oil capacity, but the exact amount can vary slightly by engine type and whether the filter is included. The following figures reflect typical capacities cited in Ford documentation and owner's manuals for gasoline versions.
- Gasoline engines (3.7L Ti-VCT V6 and 3.5L EcoBoost V6): approximately 5.7–6.0 quarts (5.4–5.7 liters) of engine oil with filter.
Note that the precise capacity can depend on the specific engine variant and any accessories that impact oil capacity. Always verify with your VIN-specific manual.
Diesel engine
The diesel-equipped Transit uses more oil due to the higher oil capacity requirements of the PowerStroke diesel engine. The typical capacity is around 12 quarts (11.4 liters) with a filter, depending on the exact configuration and oil cooler setup.
- Diesel engine (3.2L PowerStroke I5): about 12 quarts (11.4 liters) with filter.
Consult the owner's manual for the exact amount for your vehicle, as configurations and service documentation can vary by market and production run.
What to check when changing oil
Always use the recommended oil grade for your engine and climate, replace the oil filter, and run the engine to circulate the new oil before rechecking the dipstick. Record the oil change with the correct quantity and service date for future reference.
Summary
The 2017 Ford Transit's oil capacity varies by engine: around 5.7–6.0 quarts for gasoline variants and about 12 quarts for the 3.2L PowerStroke diesel. Always confirm with the owner's manual or dealership to ensure you use the exact capacity for your VIN and configuration.
How many quarts of oil does a 2017 Ford Transit take?
And if you look on top of the fill cap it tells you 5W30. So that's easy. And then this is our dipstick down here which we'll get to later.
What oil does a Ford Transit 2.2 diesel take?
SAE 5W-30
Use oil and fluids that meet the defined specification and viscosity grades. Note: If you are unable to find an engine oil that meets the specification defined, you must use an SAE 5W-30 engine oil that meets the specification WSS-M2C913-C or D.
What kind of oil does a 2017 Ford Transit 250 take?
The 2017 Ford Transit 250 uses 5W-30 synthetic motor oil for the 3.5L V6 engine, or 5W-20 for the 3.7L V6 engine. For the 3.2L 5-cylinder diesel, 5W-30 (above -29°Cnegative 29 degrees cap C−29°𝐶) or 0W-30/0W-40 (all temps) is recommended, or 5W-40 API CJ-4 if using biodiesel fuel. It is crucial to confirm your specific engine to ensure you purchase the correct type and viscosity of oil.
For the 3.5L V6 engine
- Oil Type: 5W-30 synthetic
- Capacity: Approximately 5.9 quarts with filter
For the 3.7L V6 engine
- Oil Type: 5W-20
- Capacity: Approximately 6 quarts with filter
For the 3.2L 5-cylinder diesel engine
- Oil Type: 5W-30 or 0W-30/0W-40 (at all temperatures)
- Biodiesel Use: 5W-40 API CJ-4 if using biodiesel fuel (B6-B20)
- Capacity: 11.4 liters (approx. 12 quarts) with filter
What weight of oil is recommended in the 2017 Ford Transit with a 3.7 L motor?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
