How much oil does a 2.4 L MultiAir take?
About 5 quarts (roughly 4.7 liters) of engine oil when changing the oil with a new filter; without a filter, the capacity is around 4.5 quarts (about 4.3 liters).
The 2.4 L MultiAir family covers several variations used in Dodge, Chrysler, Jeep, Alfa Romeo, and Fiat models. Oil capacity can vary slightly depending on the exact engine variant, year, and whether a filter is replaced. Below are the common figures and practical guidance to help you plan an oil change.
Oil capacity by variant
The following figures reflect typical fill volumes used in common 2.4 L MultiAir engines. Always confirm with your owner’s manual or service bulletin for your exact vehicle.
- With oil filter: 5.0 quarts (4.7 liters)
- Without oil filter: 4.5 quarts (4.3 liters)
These figures are standard full-fill volumes for a typical oil change with or without the filter; your exact capacity may vary by model and year, so consult the manual if in doubt.
Additional notes
For accuracy and to avoid overfilling, always check the dipstick after adding oil and bring the level to the manufacturer’s recommended range. If you’re unsure, consult the owner's manual or have a professional perform the oil change.
Summary
The 2.4 L MultiAir engine generally takes about 5 quarts (4.7 L) of oil with a new filter, and about 4.5 quarts (4.3 L) without a filter. Actual capacity can vary by model and year; verify with the manual for your specific vehicle.
