How much oil does a Ford courier take?
Most Ford Courier models require roughly 3.7 to 5.0 liters of engine oil for a full change, with the exact amount depending on the engine version and whether the oil filter is replaced.
The Ford Courier is a compact pickup built on Mazda B-Series underpinnings, sold in different markets with several engine options. Because capacity varies by engine and model year, this guide gives typical ranges and how to confirm the correct figure for your vehicle.
Engine options and typical oil capacity
Below are the common engines used in Ford Courier pickups and their approximate oil capacities when performing a full oil change with a new filter. Values listed include the filter; capacities without the filter are about 0.2–0.3 L lower.
- 1.6 L petrol (Mazda B6/B1600 family): about 3.7–3.9 L (including filter)
- 1.8 L petrol (Mazda 1.8L engine family): about 4.0–4.3 L (including filter)
- 2.0 L petrol (larger Mazda/B-series engines): about 4.4–4.9 L (including filter)
- 2.6 L diesel (Mazda B2600/variants in some markets): about 5.0–5.5 L (including filter)
Note: Always verify against your specific vehicle’s service documentation, as capacities can vary by market, year, and whether a replacement oil filter is installed. When in doubt, reference the engine code plate under the bonnet or the owner's manual.
How to verify the correct oil capacity for your Courier
To be certain, check the exact specification for your engine code in the official service data or owner's manual. Some markets include a stamped capacity on the service label in the engine bay. For a practical check, drain the oil, refill in small increments after running the engine briefly, and recheck the dipstick to reach the full-hot level recommended by the manufacturer.
Summary
The Ford Courier’s oil capacity depends on engine type, but typical ranges are roughly 3.7–4.9 L for petrol options and about 5.0–5.5 L for diesel variants, including the filter. Always confirm with the specific model’s documentation or engine code to ensure accuracy.
How much oil does a 2017 Ford Transit Courier take?
4 LITRES FULLY-SYNTHETIC ENGINE OIL 0W30 C2 FX FORD SPEC.
How many quarts of oil does a 3.8 L V6 take?
A 3.8L V6 engine typically takes between 4.5 and 6 quarts of oil, depending on the specific vehicle and year. For example, a 1994-2004 Ford Mustang with a 3.8L V6 needs about 5 quarts, while a 2007-2011 Jeep Wrangler with a 3.8L V6 takes about 6 quarts. Always check your vehicle's owner's manual or consult a reliable source, like an oil capacity chart, to confirm the exact amount for your specific model, and always check the oil level with the dipstick after refilling.
Here are some examples of oil capacities for different vehicles with a 3.8L V6 engine:
- Ford Mustang (1994-2004): ~5 quarts
- Jeep Wrangler (2007-2011): ~6 quarts
- Pontiac Grand Prix (2008, 3800 V6): ~4.5 quarts
- Buick LeSabre (2000): ~7.4 quarts
What oil does a Ford Transit courier use?
4 LITRES FULLY-SYNTHETIC ENGINE OIL 5W30 913D FORD SPEC.
How much engine oil does a Ford courier take?
Capacities and Specifications - 2.5L
| Item | Capacity |
|---|---|
| Engine oil fill capacity excluding the oil filter. | 4.6 L (1.0 gal) |
| Engine coolant fill capacity. | 6.8 L (1.5 gal) |
| Fuel tank fill capacity. | 60 L (13.2 gal) |
| Washer system fill capacity. | 5.7 L (1.3 gal) |
