How much oil does a Toyota Prado take?
Oil capacity for a Toyota Prado varies by engine, but most models take about 5.5–9.0 liters (including a filter). The exact amount depends on the engine code and model year, so check the owner's manual for your vehicle.
In this guide, we list typical capacities for common Prado powertrains and offer tips on verifying the correct amount for your specific model year and market.
Engine options and their oil capacities
Note: capacities can differ by market and whether a long-life or performance oil filter is used. The following figures represent commonly cited capacities for popular Prado engines when performing a standard oil change with a new filter.
- 2.7L petrol (2TR-FE) — about 5.5–5.8 L (approximately 5.8–6.1 qt) with filter.
- 4.0L petrol V6 (1GR-FE) — about 6.0–6.5 L (6.3–6.9 qt) with filter.
- 3.0L diesel (1KD-FTV) — about 8.8–9.0 L (9.3–9.5 qt) with filter.
- 2.8L diesel (1GD-FTV) — about 8.6–9.5 L (9.0–10.0 qt) with filter.
These figures are starting points and can vary by year, market, and oil specification. Always verify the exact capacity for your vehicle’s VIN in the owner’s manual or official Toyota service information.
What determines the exact capacity
The precise oil capacity is influenced by engine design, the presence of certain aftermarket or dealer-installed filters, and whether you’re performing a standard change or a top-off after an inspection. Seasonal climates and regional service specifications can also affect recommended oil quantities and viscosities.
How to check and change oil safely
To perform a safe oil change and ensure the oil level is correct, follow these steps. This list explains the process and why each step matters.
- Warm the engine to operating temperature to ensure accurate oil level readings.
- Park on level ground and engage the parking brake; turn off the engine and wait a few minutes for oil to settle.
- Check the oil level with the dipstick, noting the current level and color/consistency of the oil.
- Drain old oil completely and replace the oil filter with a new one rated for your engine.
- Pour in the recommended amount of new oil a little at a time, then recheck the level with the dipstick and top up as needed to meet the full mark.
- Dispose of the used oil properly and reset any service indicators if applicable.
Following these steps helps ensure you fill to the correct level and maintain engine health by using the right oil quantity and type.
Summary
The Toyota Prado’s oil capacity is engine-specific, typically ranging from about 5.5 liters for smaller petrol options to roughly 9 liters for larger diesel engines. Always verify the exact figure for your model year and engine code in the owner’s manual or Toyota service information to avoid overfilling or underfilling.
Final reminder: keeping the correct oil quantity and using the recommended viscosity for your engine helps protect engine performance and longevity.
How many quarts of oil does a 3.6 L V6 take?
A 3.6L V6 engine typically takes between 5 and 6 quarts of oil, but the exact amount varies by vehicle model, so you must check your owner's manual or the oil fill cap for the precise capacity. For example, some models like a 2013 Jeep JK require 6 quarts, while newer models like a 2020 Jeep Wrangler or 2018+ Jeep Wrangler JL may only take 5 quarts.
Here are some general guidelines:
- Check your owner's manual: This is the most reliable source for your specific vehicle.
- Look at the oil fill cap: It may have the required viscosity and capacity printed on it.
- Consider the model year: Newer vehicles, especially certain Jeep models, have different oil capacities than older ones.
- Change the oil filter: Always include an oil filter change, as this is part of the full oil capacity.
- After refilling, check the level: After you've filled the engine with oil, use the dipstick to check the oil level and add more if needed to reach the "full" line.
How much oil does a 3.0 liter engine hold?
For most vehicles made between 2014 and 2019, the oil capacity is 10.5 quarts, while those made after 2020 have an 8.5-quart EcoDiesel oil capacity. The oil capacity will change slightly if you change the filter as well.
How much engine oil does a Toyota Prado take?
Pour oil into the engine through the filler. Required amount of oil: 6.7 l.
What kind of oil does a Land Cruiser Prado take?
GENUINE TOYOTA LANDCRUISER PRADO ENGINE OIL 5W30 PREMIUM MOTOR FULLY SYNTHETIC.
