How much transmission fluid does a 7.3 4R100 hold?
The 7.3 4R100 transmission, commonly found in Ford trucks, holds approximately 16 to 18 quarts of transmission fluid. This fluid is essential for the proper operation and longevity of the transmission, providing lubrication, cooling, and hydraulic power to the various components.
Detailed Explanation
The 7.3 4R100 transmission is a heavy-duty, four-speed automatic transmission used in Ford's line of trucks, including the F-250, F-350, and F-450 models. This transmission is known for its robust design and ability to handle the demands of towing and hauling heavy loads.
The exact amount of transmission fluid required for a 7.3 4R100 can vary slightly depending on factors such as the specific vehicle model, the transmission's condition, and whether the fluid is being changed or the system is being refilled. However, the general recommendation is that the transmission should hold between 16 and 18 quarts of fluid.
Importance of Proper Fluid Level
Maintaining the correct transmission fluid level is crucial for the proper operation and longevity of the 7.3 4R100 transmission. If the fluid level is too low, the transmission may experience increased wear, reduced lubrication, and potential damage to internal components. Conversely, if the fluid level is too high, it can lead to foaming, increased heat, and other issues that can also harm the transmission.
It is recommended to check the transmission fluid level regularly, following the manufacturer's guidelines, and to change the fluid at the recommended intervals to ensure the transmission continues to function optimally.
Conclusion
In summary, the 7.3 4R100 transmission, commonly found in Ford trucks, holds approximately 16 to 18 quarts of transmission fluid. Maintaining the proper fluid level is crucial for the transmission's performance and longevity, and regular fluid checks and changes are essential for ensuring the smooth and reliable operation of this heavy-duty transmission.
What is the best transmission fluid for a 4R100?
Only Motorcraft Mercon multi-purpose automatic transmission fluid or an equivalent Mercon fluid should be used in all Ford 4R100 transmissions. Do NOT use air tools to force the transmission against the engine block; this may damage or break the transmission case.
How much transmission fluid does a Eaton Fuller hold?
Approx. 28 pints [13.25 liters].
How much fluid does a 7.3 powerstroke transfer case hold?
Transfer case: 2.0 quarts.
How many quarts of ATF does a 4R100 take?
The E4OD and 4R100 transmission system holds almost 18 quarts of ATF, and you must waste a couple of quarts to be sure you get it all purged and replaced, so buy 20 quarts of MERCON ATF [For the 4R100, use MERCON V]. You may use either conventional or synthetic, as long as it meets the above requirements.
How much transmission fluid does a 99 F250 7.3 take?
Automatic Transmission Fluid
Capacity: 4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts.
How much transmission fluid does a 1996 Ford f250 7.3 hold?
For Automatic Transmission: C6-Deep....MA5
| Notes: | (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
|---|---|
| Capacity: | 3 speed C6-Deep Total Fill 13.5 quarts. |
| Capacity: | 5.9 quarts Initial Fill. |
How much transmission fluid does a 2002 7.3 hold?
Automatic Transmission Fluid
Capacity: 4 speed 26 Plate OAC 4R100 Total Fill 17.6 quarts. Capacity: 6.4 quarts Initial Fill.
How many quarts of transmission fluid does a 7.3 take?
Materials
| Variant | Quantity |
|---|---|
| Ten-speed automatic transmission (10R140). | 18.2 qt (17.2 L)1 |
How much oil does an Eaton Fuller 10 speed transmission hold?
23.5 pints [11.1 liters]. Integral oil pump, internal and external oil coolers are available. Shift Pattern: Ratios and Steps: FRO Series models feature an “X” style shift pattern as standard.
How many quarts drain and fill transmission fluid?
Drivers can expect to pay $125 to $250 for a transmission fluid flush service. This is approximately twice as much as a transmission fluid change. This is due in large part to the additional fluid required. A flush will take 12 to 22 quarts, while a fluid change requires 5 to 7 quarts.
