How to turn on heads up display on Chevy Blazer?

In most Chevy Blazer models with the feature, turn on the HUD with the dedicated HUD control on the left side of the instrument panel or via the Driver Information Center, then adjust brightness and height as needed.

The Blazer’s heads-up display projects essential driving information onto the windshield, letting you keep your eyes on the road. Availability can vary by trim and options, so if your model doesn’t have the HUD installed, you won’t see a projection even when trying to enable it. This guide covers both physical controls and in-vehicle menu options to help you activate and customize the HUD.

Where to find the heads-up display controls

Use the following steps to locate the hardware switch and brightness controls for the HUD, which are typically located on or near the left side of the steering column.

• Start the engine or turn the ignition to the Run position to power up the vehicle’s electronics.


• Look for a small, labeled HUD control on the dash near the instrument cluster. It often includes a dedicated "HUD" button and a brightness dial or wheel.


• Press the HUD button to turn the display on. If the HUD doesn’t light, ensure the brightness control isn’t set to the minimum and retry.


• Adjust brightness with the brightness dial or wheel until the projection is clear without glare.


• If the HUD still doesn’t appear, check the Driver Information Center (DIC) settings to confirm the feature is enabled (see the next section).

Following these steps, you should be able to activate and fine-tune the HUD using the physical controls on most Blazer trims. If it still doesn’t appear, consult the owner’s manual or contact a dealer to confirm equipment and software requirements.

Enabling HUD through the Driver Information Center (DIC) settings

Some Blazer models let you enable or customize the HUD through the car’s settings menu, which can be helpful if the hardware toggle isn’t responsive or the feature isn’t obvious on your model.

1. With the ignition on, access the Driver Information Center using the steering wheel controls and the appropriate navigation buttons.


2. Navigate to Settings, then select Display or Heads-Up Display (the exact wording may vary by Year/Trim).


3. Toggle Heads-Up Display to On, and adjust projection height and brightness within the menu if the option is available.


4. Exit the menu and verify that the projection appears on the windshield while driving.


5. If you cannot locate the HUD option in Settings, your vehicle may not be equipped with the feature or your software may require an update.

Using the DIC can help enable and tailor the HUD experience, especially if the hardware control doesn’t respond or is absent on some trims.

Troubleshooting and tips

If the HUD still fails to appear after trying these steps, consider these quick checks:

• Confirm that your Blazer trim supports a heads-up display and that the feature is installed on your vehicle’s option list.


• Ensure the windshield area is clean and free of obstructions that could distort or block the projection.


• Increase brightness and adjust the projection height to suit your seating position; the HUD is designed to be adjustable for different drivers.


• Check for any available software updates or recalls that involve the HUD; a dealer can perform updates if needed.


• If all else fails, have the HUD hardware inspected by a dealer, as a faulty projector or sensor may require replacement.

Summary: The Chevy Blazer’s heads-up display can be activated via a physical HUD control on the dash or through the Driver Information Center settings, depending on trim and options. Availability varies, but with the correct equipment and steps, the HUD will project speed and critical alerts onto the windshield for safer, hands-free monitoring.

How do I enable heads-up display?

Systems. If you've got driving guidance provided by available Google Maps Android Auto or Apple CarPlay. You can select turnbyturn directions.

How do I turn on the Chevy head-up display?

To turn on a Chevy head-up display, look for a physical button labeled HUD on the dashboard to the left or right of the steering wheel, and press it. Alternatively, some newer models may require you to turn it on through the infotainment screen under the "HUD" or "Head-Up Display" settings.
 
Using physical controls

• Locate the physical HUD button on the dashboard, usually to the left of the steering wheel. 
• Press the button to turn the display on. 
• If the display is not on, try another button in the same area, such as the "INFO" button to cycle through display modes or the button with the sun/brightness icon to adjust brightness. 

This video demonstrates how to use the physical controls for the head-up display: 59sGM Specialty VehiclesYouTube · May 17, 2021
Using the infotainment screen 

• Tap the "HUD" or "Head-Up Display" icon on the infotainment screen. 
• Select the "Enable Head-Up Display" option to turn it on. 
• You can also find options here to adjust brightness, height, and the content that is displayed. 

This video shows how to adjust the head-up display through the infotainment system: 44sbuy with bennyYouTube · Jan 22, 2025

How to turn on heads-up display in blazer ev?

The Head-Up Display (HUD) projects some oper- ating information on the windshield. Temporary information and vehicle messages also may be displayed. Select Controls > HUD on the infotain ment screen to turn the HUD on/off and to adjust the display brightness and position.

Does the Chevy Blazer have a heads-up display?

Yes, the Chevy Blazer has a heads-up display (HUD), but it is typically available on higher trim levels and certain packages, such as the RS or the all-electric Blazer EV's higher trims. It projects important information like speed and turn-by-turn navigation onto the windshield. 
This video shows how to customize the heads-up display in a Chevy Blazer: 59sPhillipsChevyYouTube · Aug 14, 2025

• Availability: The feature is not standard on all models and is often part of an available package or reserved for specific trims, like the RS or the Blazer EV SS. 
• Functionality: The HUD projects key information, such as speed, speed limits, and navigation, directly onto the windshield to help drivers keep their eyes on the road. 
• Customization: Drivers can adjust the display's brightness, height, and rotation through the vehicle's infotainment system under the "Controls" or "Display" menu. 
• Note: Some older or lower-trim models may not have the feature. For example, the 2020 Blazer RS did not have a HUD, but it did have a forward collision warning light, which is different. It's important to check the specific model's features to confirm if it has a HUD.