How wide is a 1957 Belair?
Across most 1957 Chevrolet Bel Air models, the overall width is about 68.9 inches (1,750 mm), with only small variations by body style and trim. This figure is typically published as the width excluding any optional mirrors, and adding mirrors can widen the total slightly depending on the mirror type fitted. In short, the Bel Air commands a broad footprint for its era, influencing parking space, showroom fit, and restoration work.
Specifications at a glance
The figures below summarize the standard width metrics used by factory data and restoration references, noting where variations may occur.
- Overall width (excluding mirrors): 68.9 inches (1,750 mm)
- Typical width range across body styles (excluding mirrors): 68.5–69.5 inches (1,740–1,767 mm)
- Width with mirrors (if fitted): generally about 69.5–70.5 inches (1,767–1,791 mm), depending on mirror style
These figures describe the car’s exterior footprint as built, with a reminder that restoration shops and modern reproductions may note small deviations due to aftermarket parts, bumper alterations, or optional equipment.
Body styles and practical notes
The Bel Air lineup of 1957 included several body configurations, all sharing the same broad platform-wide width in most cases. The following styles were commonly seen in the Bel Air range, with width commonly within the same general range noted above.
- 2-door sedan
- 4-door sedan
- 2-door hardtop
- 4-door hardtop
- Convertible
- Nomad wagon (two-door wagon in some markets)
While the width figures are broadly consistent across these body styles, subtle trim differences, bumper configurations, and mirror choices can produce small measurement shifts. If you’re fitting tires, doors, or a showroom display space, consult the specific model year’s data card or a trusted parts catalog for the exact measurement for your chosen configuration.
Why width matters for restoration and parking
For restoration projects, accurate width improves fitment for body panels, fenders, and door gaps. For everyday use and display, width is a key factor in garage allocation, showroom layout, and vehicle transport planning. Knowing that the 1957 Bel Air sits around 68.9 inches wide (1,750 mm) on most configurations helps owners anticipate space needs and compatibility with aftermarket components.
Summary
The 1957 Chevrolet Bel Air typically sits about 68.9 inches wide, which translates to roughly 1,750 millimeters. Expect minor variations by body style and trim, and remember that mirror choice can add a small amount to the overall width. This broad footprint was part of the car’s distinctive presence on American streets and remains a practical consideration for restoration, storage, and display today.
How wide is a 57 Chevy Bel Air?
Torque: 210 ft-lb, 285 Nm. Length: 200 in. Width: 73.9 in. Height: 58.3 in.
How much is a 1957 Chevy belair worth today?
The price for a 1957 Chevy Bel Air varies significantly based on condition, with prices for well-maintained or restored models typically ranging from $50,000 to over $100,000. Prices can be much lower for cars needing work or higher for exceptional, rare examples, with the highest auction prices exceeding $275,000. You can find listings from about $2,500 up to $244,000 for a wide range of conditions and models on sites like Classics on Autotrader, Classics on Autotrader.
Price ranges and factors
- Average/Good Condition: A good-condition, average-spec 1957 Bel Air can be around $44,343, according to Hagerty.
- Well-Maintained/Restored: Prices for cars in excellent, restored, or highly original condition often fall between $50,000 and $100,000, sometimes more.
- High-End: The highest prices, often seen at auctions, are for rare models or those in exceptional condition and can exceed $275,000.
- Lower End: Cars in poor condition, needing extensive repairs, or with title issues may sell for as low as $4,950.
- Original Price: When new, the 1957 Chevy Bel Air was priced at about $2,500.
Where to find cars for sale
- Classics on Autotrader: Features listings from about $2,500 to $244,000.
- eBay: Showcases a wide variety of 1957 Chevy Bel Air models, from project cars to high-end builds.
- Hemmings: Has listings with prices ranging from around $52,000 to over $174,000.
- Cars.com: Lists cars with prices in the $39,900 to $149,900 range, depending on the specific vehicle and location.
- YouTube: Many classic car dealers post test drive videos of cars they have for sale, often including the asking price.
How wide is a 57 Corvette?
70.5 in.
Mechanical Dimensions
| Wheelbase | 102.0 in |
|---|---|
| Track Frt/Rear (in) | 57.0/59.0 |
| Length | 168.0 in. |
| Width | 70.5 in. |
| Height | 51.9 in. |
What is the most sought after 57 Chevy?
1957 Chevy Bel Air Popularity
The '55 and '56 models had developed a reputation for reliability and, when needed, simple and cheap repair. This carried through into 1957. The abundance of 1957 Bel Airs also helps account for why the car continues to be popular.
