How wide is a standard truck bed between wheel wells?
Typically about 50 inches (roughly 127 cm) wide between the wheel wells on full-size pickups, though the exact figure varies by model, bed length, and cab configuration.
The distance is measured from the inside edge of one wheel housing to the inside edge of the opposite wheel housing across the bed. This between-wheel-well width determines how long items can lay flat between the wheels and can influence what you can haul without tilting or stacking.
Understanding the measurement
The width is the clear space between the wheel housings inside the bed, not the total external width of the bed. It can be affected by bed type (short, standard, or long), cab configuration, and any extraneous features like bed liners or utility rails.
Typical widths by truck class
The following ranges reflect common configurations found in contemporary pickups. Exact numbers can vary slightly by year, trim, and bed choice.
Full-size pickups
In this segment, the between-wheel-well width is typically around 50 inches, with most models clustering in a narrow range of about 49–51 inches (approximately 125–129 cm). This offers a spacious middle area for longer items to sit between the wheels.
- Ford F-150: about 50 inches between wheel wells (roughly 127 cm)
- Chevrolet Silverado 1500 / GMC Sierra 1500: about 50 inches
- Ram 1500: about 50 inches
- Toyota Tundra: about 50 inches
Overall, full-size pickups provide a consistent, roomy between-wheel-well width around 50 inches, making them versatile for longer loads.
Mid-size and compact pickups
Mid-size pickups (such as the Toyota Tacoma, Nissan Frontier, Ford Ranger) generally have a narrower between-wheel-well width, typically about 41–43 inches (approximately 104–109 cm).
- Toyota Tacoma: about 41–43 inches
- Nissan Frontier: about 41–43 inches
- Ford Ranger: about 41–43 inches
These narrower widths reflect smaller bed dimensions and wheelhouses, making them less suited for very long items to sit between the wheels compared with full-size models.
Summary
For most buyers, the standard width between wheel wells in a full-size pickup is around 50 inches, providing a broad middle space for long items. Mid-size pickups are noticeably narrower, typically in the 41–43 inch range. Always verify your specific model and bed length in the manufacturer’s specifications when planning to haul particular materials.
How wide is a standard pickup truck bed?
A standard pickup truck bed is typically about 50.6 inches wide between the wheel wells, which is a crucial measurement for fitting items like standard plywood sheets. The total width at the floor can be wider, around 71.4 inches, but this varies by model.
Bed width variations
- Width between wheel wells: This is the narrowest part of the bed and is consistent across many models. A common measurement is approximately 50.6 inches, which allows a standard 4x8 sheet of plywood to be laid flat.
- Width at the floor: The total width at the bed's floor is wider, but less consistently standardized. For example, a standard Chevy Silverado bed is about 71.4 inches wide at the floor.
- Factors affecting width: The overall width depends on the truck's make, model, and specific configuration (e.g., standard, short, or long bed).
How to choose the right bed size
- Consider your needs: If you frequently haul materials like plywood, the width between the wheel wells is the most important dimension.
- Check specifications: Always check the specific bed dimensions for the truck model you are interested in, as measurements can vary.
- Standard vs. short bed: While the width between the wheel wells is often similar, the total width and length can differ between short and standard beds.
What size bed is between wheel wells on F150?
50.6 inches
Frequently Asked Questions (FAQs) about F150 Bed Sizes
A: The bed width of the Ford F-150 is 50.6 inches between the wheel wells, and the overall width is 66.9 inches.
How wide is the F250 bed between wheel wells?
The Ford F-250 bed width between the wheel wells is approximately 50.5 to 50.6 inches. This measurement is consistent for both the 6.75-foot and 8-foot bed options, though the overall width of the bed at the top will be larger.
- Width between wheel wells: Approximately 50.5 to 50.6 inches
- Maximum width: Around 66.9 inches at the top of the bed rails
- Height/Depth: 21.1 to 21.4 inches
How wide is a truck bed between the wheel wells?
The width of a truck bed between the wheel wells varies by model but is typically around 50 to 51 inches for many full-size trucks, such as the Ford F-150 and Chevy Silverado. Some mid-size trucks, like the Ford Ranger, may have a smaller width, around 48.2 inches, while some models may be larger or smaller depending on the manufacturer and specific trim.
Example widths
- Ford F-150: ~50.6 inches
- Chevy Silverado: 50.63 inches
- Ram 1500: 51 inches
- Ford Ranger: 48.2 inches
- Toyota Tacoma: 44.7 inches
