Is a 2009 Dodge Caliber all wheel drive?
The 2009 Dodge Caliber was available with both front-wheel drive and all-wheel drive (AWD) configurations. The AWD system was an optional feature on select Caliber models, providing enhanced traction and stability in various driving conditions.
Dodge Caliber All-Wheel Drive Overview
The 2009 Dodge Caliber was a compact hatchback that offered an available all-wheel drive system as an upgrade from the standard front-wheel drive setup. The AWD system was designed to provide improved handling and control, especially in inclement weather or on slippery surfaces. The AWD Caliber models were equipped with a continuously variable transaxle (CVT) transmission to manage power distribution to all four wheels.
- The AWD system was offered as an optional feature on the Caliber SXT, Caliber R/T, and Caliber SRT-4 trims.
- The AWD system was not available on the base Caliber SE model, which came standard with front-wheel drive.
- Dodge claimed the AWD Caliber could provide up to a 45% improvement in traction compared to the front-wheel drive version.
While the all-wheel drive Caliber provided enhanced capability, it also came with a slight decrease in fuel efficiency compared to the front-wheel drive models. Buyers had to weigh the trade-offs between improved traction and handling versus slightly lower gas mileage when deciding whether to opt for the AWD system.
Identifying an AWD Caliber
To determine if a specific 2009 Dodge Caliber is equipped with all-wheel drive, there are a few key identifiers to look for:
- Check the vehicle's trim level - the AWD system was only available on the SXT, R/T, and SRT-4 trims, not the base SE.
- Look for "AWD" or "4x4" badging on the exterior of the vehicle.
- Inspect the vehicle's information sticker (usually located on the driver's side door jamb) for an indication of the drivetrain configuration.
If the Caliber does not have any of these AWD-specific identifiers, then it is likely a front-wheel drive model.
