Loading

Is a Ford Flex a V6 or V8?

The Ford Flex uses a V6 engine in every model year; there is no V8 option offered for this vehicle.


From its launch in 2009 until its ending in 2019, the Flex was powered by a six-cylinder powerplant designed for smooth highway cruising and family usability. Ford did not offer a V8 variant for the Flex, and most models relied on a 3.5-liter V6 with Ti-VCT technology. Power figures varied slightly by year and trim, but the core configuration remained V6 throughout the entire production run.


Engine options and performance through the years


Here's a concise look at the V6-centric setup across the Flex's production life, illustrating that a V8 was never part of the lineup and how the V6 performed over time.



  • Engine type: 3.5-liter Duratec Ti-VCT V6 served as the standard and, for the vast majority of trims, the only engine during the Flex’s production years.

  • Power output: Horsepower varied by year and tuning, generally ranging from roughly 260-something hp in earlier years to higher figures in later years, with torque in the mid-200s lb-ft depending on the calibration.

  • No V8 option: Ford did not offer a V8 configuration for the Flex at any point in its history.


In practical terms, buyers should expect a V6-driven Ford Flex with emphasis on balanced performance, towing capability comparable to other mid-size crossovers, and fuel efficiency in line with six-cylinder family SUVs of its era.


What buyers should know


Practical considerations


When shopping for a used Ford Flex, verify the exact engine details for the specific year and trim via the vehicle’s VIN or owner’s manual. However, you can be confident that every Flex uses a V6 engine, and there was no V8 option offered. This aligns with the model’s focus on spacious interior, comfortable ride, and pragmatic performance rather than high-end V8 power outputs.


Summary


Bottom line: The Ford Flex is powered by a V6 engine throughout its production run, with no V8 option ever offered. The 3.5-liter Duratec Ti-VCT V6 is the common configuration, delivering varying horsepower across years but never stepping into V8 territory.

Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.