What bolt pattern is a 1994 Chevy Caprice?
The 1994 Caprice uses a five-lol lug configuration on a 4.75-inch bolt circle (5x120.65 mm).
Bolt pattern basics
In wheel terminology, the bolt pattern (or bolt circle) specifies how many lug holes there are and the diameter of the circle they form. For the 1994 Chevrolet Caprice, the standard specification is five lugs on a 4.75-inch (120.65 mm) bolt circle. This pattern is common among GM full-size cars from that era, and it helps determine which wheels will fit without spacers or adapters.
Wheel compatibility and options
To understand what wheels will fit your Caprice, note that the key factors are the lug count, bolt circle diameter, center bore, and offset. The following options are typically compatible with the 5x4.75 pattern, provided the other fit factors line up.
- Factory and aftermarket wheels advertised as 5x120.65 mm (5x4.75") bolt pattern
- Wheels from other GM B-body models (Caprice, Impala, etc.) that share the same bolt pattern
- Aftermarket wheels designed for 5x4.75" with appropriate offset and hub bore
When selecting wheels, always verify the center bore size and offset to ensure proper hub engagement and caliper clearance in addition to the bolt pattern.
How to verify on your specific vehicle
If you’re unsure about your car’s exact fit, follow these verification steps to confirm the bolt pattern and wheel compatibility.
- Park the Caprice on a flat surface and chock the wheels to prevent movement.
- Remove a wheel to expose the lug nuts and hubs.
- Count the number of lug nuts on the wheel (should be five).
- Measure the distance between two adjacent lug holes across the wheel, then measure across the circle that passes through all lug holes (this is the bolt circle diameter).
- Compare your measured diameter to 4.75 inches (120.65 mm). If it matches, the bolt pattern is correct.
- Check the hub bore size on the wheel and the vehicle’s hub to ensure a proper hub-centric fit, or consider appropriate adapters if needed.
If measurements don’t match or you’re uncertain, consult the vehicle’s manual, contact a dealership, or use a bolt-pattern gauge to avoid ordering wheels that won’t fit.
Summary
The 1994 Chevy Caprice uses a 5-lug pattern on a 4.75-inch bolt circle (5x120.65 mm). This pattern is common among GM B-body cars of that era, making many wheels from related models compatible—provided offset, center bore, and caliper clearance are also suitable. Always verify all fit factors before purchasing wheels to ensure safe and proper installation.
